the clutch on your A/C compressor needs to be replaced.
there are three bolts under the transmission case by the converter clutch butterfly valve take them off and its under there but make sure you have completely removed the gasket
To replace the AC clutch discharge the freon, remove the clips, and remove the screws under the bumper. Remove the driver side headlight, and bolts.
no, unless u have to remove the compressor unit. The clutch can be replaced with out removing the compressor if you have room to do it.
They require a puller.
This requires special tools to remove and install the ac clutch and bearing. The air gap on the ac clutch must be done during install.
how do you adjst clutch on 87ford f150
To remove the AC clutch on a 1986 Chevy van G-20, first, disconnect the battery and discharge the AC system safely. Then, remove the serpentine belt by loosening the tensioner. Next, unbolt the AC compressor from its mounting bracket and disconnect the electrical connector. Finally, use a clutch removal tool to detach the clutch from the compressor shaft.
You need a Z7 Clutch puller.
How do i remove an air compresser in a GMC Cheyene
The AC Clutch on that year truck is conected to the compressor, Unfortunately there is no way to separate the both. You must pick up a new compressor if your clutch has failed...
To change the AC compressor clutch on a 2001 Peterbilt, first, disconnect the battery and remove the serpentine belt from the AC compressor. Next, remove the compressor from its mounting bracket to access the clutch assembly. Use a puller tool to detach the clutch from the compressor shaft, then install the new clutch by reversing the removal process. Finally, reassemble everything, reconnect the battery, and check the AC system for proper operation.