To remove an 80 amp fuse from a 2005 Kia Rio, first, ensure the vehicle is turned off and the keys are removed from the ignition. Locate the fuse box, typically found under the hood or in the cabin, and identify the specific fuse you need to remove. Use a fuse puller or a pair of pliers to grip the fuse and gently pull it straight out. Always check the fuse for damage and replace it with a new one of the same amperage if necessary.
Turn off the ignition. Remove the small bolts at the terminals with a socket wrench to allow the fuse to be removed. Replace and put bolts back on.
those are really in there, just alot of wiggling. My question to you is why ? I never ever have had to replace an 80 a fuse. Make sure you disconnect the battery on that one before you do it.
There are a couple of phillips screws on either side of the 80 amp fuse leading to the engine fuse box. :)
To remove the 80 amp main fuse from a 1999 Suzuki Vitara, first, ensure the vehicle is turned off and the key is removed. Locate the fuse box under the hood, typically near the battery. Use a fuse puller or a pair of pliers to grasp the fuse firmly, then pull it straight out. Be cautious not to damage any surrounding components during the removal process.
To remove a fuse from a fuse box, locate the specific fuse you want to remove, use a fuse puller tool or a pair of needle-nose pliers to grip the fuse, and gently pull it out of the fuse box. Make sure to disconnect power before removing the fuse to avoid any electrical hazards.
The 80 amp fuse for a 2000 Toyota Solara is located in the engine compartment fuse box. This fuse box is situated near the battery, typically on the driver's side. You can find the specific fuse by referring to the fuse diagram on the cover of the fuse box for identification.
it is the 4998 engine code of 240 amp of the engine code:fgh46357fjg so the kind of fuse of 80 amp fuse is, 160 amp fuse. So you can multiply that and, 480 amps. There you go.
To change the 80-amp main fuse in a 1995 Ford Aspire, first ensure the ignition is off and disconnect the negative battery terminal for safety. Locate the fuse box, which is typically under the hood. Remove the old fuse by pulling it straight out, and then insert the new 80-amp fuse in its place, ensuring a secure fit. Finally, reconnect the negative battery terminal and test the electrical systems to ensure they are functioning properly.
Identify the fuse. Remove it
How to remove the fuse box
needel nose pliers in the middle of the fuse.