0
You have to release the pressure from tensioner which is attached to the Idler Pulley. The easiest way to do this is to remove the panel located at the bottom of the passenger fire wall. The panel is held in by 3 10mm screws. Once you remove the panel you can see the tensioner and pulley.
What else can I help you with?
How do you replace the bulb in high mount brake light for a 2006 Hyundai Sonata?
you need to remove the rear seat
How do you replace a serpentine belt on a 2006 ford five hundred?
from the bottom!
How do you replace serpentine belt tensioner on a 2006 Toyota tundra?
how do replace the belt tensioner on a 2006 toyota tundra. please tell me step by step
What is the cost to replace a serpentine belt in a 2005 Toyota matrix?
The total cost for replacing bolt, serpentine belt and belt tensioner on a 2006 Honda Civic?
How to replace cabin air filter in 2006 sonata?
To replace the cabin air filter in a 2006 Hyundai Sonata, first, locate the filter compartment behind the glove box. Open the glove box and remove any contents, then gently squeeze the sides to release the stops and lower it fully. Remove the cover of the filter compartment by unclipping it, take out the old filter, and insert the new one, ensuring the airflow direction is correct. Finally, reassemble the cover and the glove box to complete the installation.
How do you replace the gear shift light bulb on a 2006 Hyundai sonata?
To replace the gear shift light bulb on a 2006 Hyundai Sonata, first, ensure the vehicle is turned off and in park. Remove the center console cover by unscrewing any visible screws and carefully prying it away. Locate the bulb holder beneath the gear shift and twist or pull it out to access the burnt-out bulb. Replace it with a new bulb, reassemble the console, and test the light to ensure it works.
How do you replace the alternator on a 2006 Mazda tribute 4-cylinder automatic?
To replace the alternator on a 2006 Mazda Tribute with a 4-cylinder engine, start by disconnecting the negative battery cable to ensure safety. Remove the serpentine belt by loosening the tensioner pulley, then unbolt the alternator from its mounting bracket. Disconnect the electrical connectors and remove the alternator. Install the new alternator by reversing the steps: connect the electrical components, secure it in place, and reattach the serpentine belt before reconnecting the battery.
How many valves does the 2006 Hyundai Sonata have?
The 2006 Hyundai Sonata has 16 valves.
How do you replace serpentine belt on a 2006 Chevy truck?
loosein your tensioner arm and remove the old belt but remember how it comes off so u can put the new one on right then tightin the tensioner arm
How do you replace the alternator in a 2006 KIA Sportage?
To replace the alternator in a 2006 KIA Sportage, first disconnect the negative battery cable to prevent any electrical shorts. Remove the serpentine belt by loosening the tensioner, then unbolt the alternator from its mounting bracket. Disconnect the wiring harness and remove the alternator, then install the new alternator by reversing the steps: connect the wiring, bolt it in place, and reattach the serpentine belt. Finally, reconnect the battery cable and start the engine to ensure the new alternator is functioning properly.
How do you adjust the headlights on a 2006 Hyundai Sonata?
How do you adjust headlights on a 2006 Hyundai Sonata v6
What size engine does the 2006 Hyundai Sonata have?
The 2006 Hyundai Sonata has an inline 4 engine.
