0
If it is welded on, you can grind away at the weld until it either falls off, or you see what appears to be a crack all around the weld ( you can then pry it off). If it is clamped on, then you should just have to beat the rust away with a hammer and chisel. But really, mufflers are so cheap you should just get a new one.
What else can I help you with?
How do you remove magnaflow muffler from Dodge truck?
To remove a MagnaFlow muffler from a Dodge truck, first, lift the vehicle securely using jack stands for safety. Disconnect the exhaust pipes from the muffler by loosening the clamps or cutting the pipes if necessary. Remove any hangers supporting the muffler, then carefully slide the muffler out of the exhaust system. Finally, clean the exhaust pipe ends to ensure a proper fit for any replacement muffler.
What is the cause of a roaring sound coming from the exhaust system on a 2001 Subaru Forester?
Probably a rotted exhaust pipe has broken off. Take the car to a muffler shop for repair.
Mercury 150 thermostat location?
the thermostat on most mercury's is located just above the muffler. must remove exhaust pipe and muffler to reach thermostat. good luck.
Where is the catconverter on the exhaust muffler of a 1996 Honda CR-V located?
on the exhaust pipe ;)
How do you remove resinator in muffler?
the resonator is a separate part of the exhaust system not part of the muffler it is to change the tone of an engine sound some are mounted before the muffler and some after the muffler if you really want to remove it cut it off with a sawsall or chain cutter and weld in a piece of pipe or look at a aftermarket exhaust catalog many replacement pipes omit resonator's.
How do you remove a gas tank on a 1991 firebird?
You have to remove the intermediate exhaust pipe, the muffler, and drop the rear differential to remove the gas tank. gas tank must be removed
How do you replace a muffler on a 2002 Jeep Liberty?
To replace the muffler on a 2002 Jeep Liberty, start by safely lifting the vehicle and securing it on jack stands. Next, locate the muffler and cut the exhaust pipe before and after the muffler using a reciprocating saw or pipe cutter. Remove the old muffler, then install the new muffler by aligning it with the exhaust pipes and securing it with clamps or welding as needed. Finally, lower the vehicle and start the engine to check for leaks.
What are the six parts of the exhaust system?
The exhaust valve, the exhaust manifold, the header pipe, the catalytic converter, the muffler and the tail pipe, not to mention the clamps and hangers.
How does the exhaust pipe connect to the muffler?
Answer: Welded onBelow would be how to repair if the muffler has broken away from the exhaust pipe.If you have a welding machine:If your just attaching the muffler, You would need to attach the muffler to its hanger, then find a way to secure it to the exhaust so you can then weld it in place.If you do not have a welding machine:Most auto repair shops, have a welding machine so that they can do these kind of repairs if you lose your muffler, you can also purchase some special muffler/exhaust tape to tape around the break. Using the tape is a temporary fix.
How do you remove a broken screw from exhaust manifold to down pipe 4.5 1990 cad?
water
What is the purpose of the exhaust manifolds?
It carries the exhaust away from each cylinder and routes it to the exhaust pipe where it flows to the catalytic converter and then to the muffler where the sound is deadened. It then flows from the muffler to the tailpipe where it is released into the atmosphere.
What is the stock exhaust pipe size on a 1998 silverado?
its about 2.5" but that is from the headers to the muffler and the tail pipe is 3"
