There should be 2 screws on the front of the rotor, remove those and the rotor should come right off....you also have to take off the caliper bracket.
How do you replace the front break pads on a Toyota corolla .
How do I change the Front Brakes on a 2001 Toyota Corolla?
The Toyota Corolla front bumper is held in place with eight retaining bolts. Remove the retaining bolts and the bumper will come off.
on the fenderwell in front of the brake master cyl. by the charcoal canister.
The reason that the front brakes on a 1995 Toyota Corolla are not releasing is likely due to low brake fluid. It could also be that the rotor is stuck or the pad has frozen into a clamped position.
Remove the tire and wheel from your 1989 Toyota Corolla. Remove the end of the axle. Remove the axle seal. Remove the wheel bearing. Reverse the process to install your new wheel bearing.
Remove the cover from around the brake handle by removing the two screw in the lower front and the two bolts inside the center console. Remove the top locking nut from the cable and then turn the other nut clockwise to adjust the brake.
The 2005 Toyota Corolla has 41.3 in. of front leg room.
The 2010 Toyota Corolla has 38.8 in. of front head room.
The 2013 Toyota Corolla has 38.8 in. of front head room.
The 2013 Toyota Corolla has 54.8 in. of front shoulder room.
The 2014 Toyota Corolla has 42.3 in. of front leg room.