From the engine bay on driver side, there is a bolt in the middle of the fuse box wire harness. Use a 1/4 socket or nut driver to remove. Remove harness. Inside there are two phillips head screws that hold the fuse box to the firewall, they are in opposing corners. Unscrew them and gently pull on the fuse box to remove. Be careful of wore ties and loom when pulling.
On the side of the dash, passanger side.
In the fuse box under the driver side dash above the e-brake pedal.
To remove a fuse from the fuse box in a 2004 Jeep Wrangler, first, locate the fuse box, which is typically found under the dashboard on the driver's side or in the engine compartment. Use a fuse puller or a pair of needle-nose pliers to grasp the fuse you want to remove. Pull the fuse straight out of its slot. Ensure the vehicle is turned off before doing this for safety.
The fuse panel for a 2003 Jeep Wrangler is located behind the glove box. The owners manual describes how to remove the glove box to access the panel. Removing the glove box is simple.
The 2006 Jeep Commander does not have an interior box. The fuse box in the engine compartment is the only fuse box.
remove the glove box insert. a fuse panel is located there
The fuse box is under the hood on a 2008 Jeep Grand Cherokee.
The fuse box on a 2012 Jeep Liberty is under the hood next to the battery.
It's behind the glove box. Open the glove box and remove the strap on the right side, the box will fall right out.
Open the front passenger side door; it is on the side of the dash.
The fuse box is behind the glove box door.
The fuse for the 1994 Infinity Gold stereo amplifier in a Jeep Grand Cherokee is typically located in the vehicle's fuse box. This fuse box is usually found under the dashboard on the driver's side or in the engine compartment, depending on the specific model. Check the diagram on the fuse box cover or the owner's manual for the exact fuse location and rating for the amplifier. If the fuse is blown, replacing it may resolve audio issues with the stereo system.