answersLogoWhite

0

It takes a special tool that you may be able to rent from a part store.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How do you remove a pulley from power steering pump on 1997 dodge ram truck?

It requires a power steering pulley PULLER, You can rent them at a parts store.


87 Dodge Dakota 4x4 starter removal?

You have to remove the steering intermediate shaft and remove the starter from the top.


Where is the idler tensioner pulley on a 98 dodge Dakota?

The 1998 Dodge Dakota tensioner pulley will be the top pulley on the left-hand side of the engine. The tensioner pulley will be able to slide back and forth.


Where is the tensioner pulley or idler pulley on a 2001 Dodge Dakota Sport 2.5L 4-Cyl I am trying to change the serpentine belt?

Standing in front of truck look to your below power steering pump you see a pulley that is your tenisorner pulley 15mm loosing the bolt on pulley above to the left is another 15mm also turn counter clock wise to loosen it this will help remove the belt


Why is your dodge Dakota 2004 hard to steer?

The most common reason is low power steering fluid. Also the pump pulley may be starting to freeze up, or the belt that turns the pulley may be loose and slipping.


A diagram for a 1987 dodge Dakota 3.9 v6 power steering system components?

how do i put a power steering pump on a 1987 dodge Dakota truck v6


How do you remove steering wheel in a 1989 dodge Dakota?

To remove the steering wheel from a 1989 Dodge Dakota, first, disconnect the negative battery cable to prevent any electrical issues. Remove the steering column cover by unscrewing the screws, then locate the retaining nut at the center of the steering wheel and use a socket wrench to remove it. Once the nut is removed, use a steering wheel puller to safely detach the wheel from the column, as it may be tightly fitted due to the taper. Finally, carefully lift the steering wheel off the column.


How do you adjust tension pulley 2000 dodge Dakota?

You don't. The pulley is pretensioned by the manufacturer. If the belt tension is incorrect, the pulley must be replaced.


How do you remove transmission from 1988 dodge Dakota 4x4 3.9liter motor?

How do I get to the flywheel bolts on a 98 dodge dakota to remove a transmission


What is the name of the pulley on a 1997 dodge stratus 2.5 V6?

There is a crankshaft pulley, alternator pulley, power steering pump pulley, AC pulley, idler pulley, tensioner pulley, etc.


Do they make a manual steering box for 1999 dodge Dakota 4x4?

No


How do you replace the idler pulley on a 1997 dodge caravan?

Remove the belt, then remove the bolt holding in the idler pulley.