To remove the radio from a G20 van, first disconnect the battery to ensure safety. Then, use a flathead screwdriver to carefully pry off the trim panel surrounding the radio. Once the trim is off, remove any screws securing the radio in place, and gently pull the radio out of the dash. Disconnect the wiring harness and antenna cable from the back of the radio to complete the removal.
ejaculate on them
Carefully. Why would you bother?
no
fuse box chevy g20 van
no
The blower motor in a 1988 Chevy G20 van is typically located under the dashboard on the passenger side. You may need to remove the lower dash panel to access it. It's mounted to the HVAC housing, which can be accessed from inside the van.
In a 2000 G20 Chevy van, the fuse for the radio and mirrors is typically located in the fuse box under the dashboard on the driver's side. You can find the fuse box by removing the cover panel. Look for the specific fuse labeled for the radio or power windows/mirrors in the fuse diagram on the cover or in the owner's manual. If you need to replace it, ensure you use the correct amperage fuse.
I did a scrap metal run with my 92 G20 van and empty it was 4400 pounds.
Should be 2 bolts (3/4 socket) & remove & replace
I need some help, what are you actually trying to do and what are you referring to as the flange?
Under the dash you will see the switch on a braket behind the brake pedel. Unplug remove and there you go
curb weight on an 88 g20 chevy cargo van