Drop it out of the back, there should be a hole above the bumper on the rear.
how to change brake lines on a 1996 ford econoline e-150
How do you take out a battery from a 95 ford econoline van
Behind the bumper remove plastic cover from under rad
R134a
If it has one, you simply use the correct size socket and ratchet and turn counterclockwise.
how to remove the spare on a 2003 explorer
Actually , it's fuel injected , so there is no carburetor on a 1996
Sell your Ford junk its not the only problem you will have.
You can lower it with the help of a mechanic. You can take it out and then place it onto the empty part.
lift up the carpet in the boot and there will be a big nut 17mm or 19mm, remove this and the panel holding the spare tyre should drop down and can be removed
To remove the rotors on a 1996 Ford Econoline van, first, ensure the vehicle is securely lifted and supported on jack stands. Remove the wheel lug nuts and take off the wheel. Next, remove the caliper by unbolting it from the bracket, then slide it off the rotor and support it to avoid straining the brake line. Finally, remove the caliper bracket bolts, detach the bracket, and the rotor should slide off the hub; if it’s stuck, gently tap it with a hammer to loosen it.
with a lot of special words.