i had some trouble with this myself it is between the heads yes ?.
you need to order the part needed there's a special wrench that comes with it go to your local small engines shop and order one.
The recommended gap for a 2000 Honda XR250R motorcycle is .035" Additional info. FYI: NGK shows part # CR9EH-9 (or CR9EHIX-9 for the iridium version) as the correct spark plug for this application.
Remove the rubber cover and plug lead from spark plug. Using a bike plug spanner [cheap at your favourite auto supermart] remove plug.
Remove the chrome cover, pull out the plug cable, use the spark plug socket with a ratchet.
To remove the spark plug on a Honda FES Pantheon, first, ensure the engine is cool and disconnect the battery for safety. Locate the spark plug by removing any components that may obstruct access, such as the seat or cover. Use a spark plug socket and ratchet to unscrew the spark plug counterclockwise. Once removed, inspect the plug and replace it if necessary before reinstalling it by threading it in and tightening it securely.
OEM are the best spark plug wires for the Honda cbr. These spark plug wires can be found at the local Honda dealership.
What is the spark gap plug setting on a 2007 Honda accordAnswerwhat is the spark plug gap setting on a 2007 Honda accord?
If you remove your seat, then remove your gas tank and radiator shrouds, then theres a black rubber coil going into the front/top of the motor remove that. then bam spark plug
To change the spark plug in your Honda 400 XR, first ensure the engine is cool and disconnect the spark plug wire. Use a socket wrench to remove the old spark plug by turning it counterclockwise. Inspect the new spark plug and gap it to the manufacturer's specifications if necessary, then install it by threading it in clockwise and tightening it securely. Finally, reconnect the spark plug wire, and your spark plug replacement is complete.
remove the spark plug wires one at a time and unscrew the plugs
To change the spark plug on a Honda Rincon, first, ensure the engine is cool and disconnect the negative battery terminal. Remove the spark plug cap and use a spark plug socket to carefully unscrew the old spark plug. Before installing the new spark plug, check the gap and adjust it if necessary. Finally, screw in the new spark plug by hand, tighten it with the socket, reattach the spark plug cap, and reconnect the battery.
What is the spark gap plug setting on a 2007 Honda accordAnswerwhat is the spark plug gap setting on a 2007 Honda accord?
The spark plug on a 2011 Honda Rancher TRX 420 is located on the right side of the engine, near the front. To access it, you may need to remove the plastic cover on the right side of the frame. The spark plug is threaded into the cylinder head and can be removed with a spark plug socket.