SRS light indicates airbag fault, if this is showing then you should get your car checked.
how do you remove the SRS?
if the engine is running and the red srs light is on. it indicates that the airbag/bags are not working correctly. if the light is on then goes out when the ignition is on. they are functioning correctly
If the "SRS" light is on on your dashboard, then chances are you need to replace the fuse that relates to your SRS (Safety Restraint System - airbags to you and me). Find the fuse panel and the SRS fuse, then examine it for burns. If it looks black or dark brown as if its burnt, then it needs replacing. If there isn't a fuse there, then you should probably buy one if you want your airbags working. Hope this helps!
The SRS light on a 1995 Honda Civic can be reset by jumping the wire clip. Unplug the SRS wire clip found under the dashboard. Take two wires and insert them into the clip. Tie the wires together and turn the car on and off twice. This will reset the SRS system.
Remove the dashboard instrument cluster cover. The cover is secured with four retaining screws. Take hold of the dashboard light, push in and turn at the same time to remove it. Reverse the process to install the new dashboard light.
SRS Suplilmental Restrant System, The air bags.
safety restraint system
"la luz encendida en el tablero" = the light is on, over the dashboard (of a car) or "the light that's on, over the dashboard (of a car) "Srs (señores) de un Mitsubishi galant 2002" = gentleman of the Mitsubishi galant 2002 (the car)
you have to remove the cover of the dashboard to replace the light bulbs
By having it repaired by a qualified technician. It is flashing because something is wrong with the SRS. Do not ignore this and do not attempt to repair yourself. Serious injury can occur when working with the SRS.
Resetting the SRS light on a 1999 Acura CL requires that you locate the SRS fuse. This fuse is located in the under-hood fuse box and is labeled SRS. Once you locate the fuse you will need to remove it for thirty seconds and then reinstall it. This process will reset the SRS light. To ensure that the light does not come back on you should also inspect the wiring and connections for the SRS system. In order to complete the reset process you will need to do the following steps: Locate the SRS fuse in the under-hood fuse box. Remove the fuse for thirty seconds. Reinstall the fuse. Inspect the wiring and connections for the SRS system.Once you have completed the above steps the SRS light should be reset and you should be able to drive your 1999 Acura CL without any issues. However if the light continues to come on you may need to take your vehicle to a qualified mechanic to diagnose and repair the problem.