0
To remove the driver's side fender on a 1998 Chevy S10, start by disconnecting the battery to ensure safety. Next, remove any visible bolts securing the fender, typically located in the engine bay, along the top, and under the wheel well. You may need to remove the wheel and inner splash guard for better access. Finally, gently pull the fender away from the body, ensuring you detach any clips or connectors before fully removing it.
What else can I help you with?
Where is fuel pump relay on 93 chev s10 2.5l?
Under the hood on the drivers side firewall, close to the drivers side fender.
Where is the fuel pump relay located in 1988 Chevy s10 4.3L?
It should be found under the hood on the drivers side firewall or on top of the drivers side inner fender.
Were is the oil filter located on 92 Chevy s10 blazer?
I think it is under the hood, drivers side, up front close to the radiator. It is mounted to the drivers side fender behind headlight
How do you remove the piece the filter screws into from the fender of a 93 s10 Blazer Removed all bolts Need to remove fender Can't do it with piece attached Is it welded to fender?
I looked at my remote filter on my 93 S10 Blazer and it is bolted to the inner fender which shouldn't need to be removed to remove the fender.
Where is the fuel pump relay on a 1992 s10 blazer 4.3 liter?
It should be found under the hood, on the drivers side, on the firewall, between the power brake booster and the drivers side fender. If there are two relays there it should be the one closer to the fender. The other relay is for the AC compressor clutch.
What are the steps in taking out a s10 engine?
After removing radiator, I remove passenger side fender to easily access all connections for intakes - factory recommends raising body 2" passenger side to access transmission bolts and fuel lines sensors - removing inter fender drivers side also helps for the exhaust side - have done four S 10 engine removals this year
Where is the fuel pump relay on a 1991 chevy s10?
Need to know what size engine you have in that 91 S10. If it is a 4.3L, the fuel pump relay would be found under the hood, on the firewall, drivers side, between the master cylinder and the fender. If there is two relays there, it would be the one closer to the fender.
Does the fuel pump of a 92 Chevy s10 have a relay and where?
Yes it does and it would be found under the hood, on the firewall, drivers side, between the brake master cylinder and the fender. If there are two relays there it would be the one closer to the master cylinder if the engine is a 2.5. If it has the 4.3 it would be the relay closer to the fender. If it has the 2.8 engine it would be mounted on top of the drivers side inner fender.
Where is the PCM located on 2000 S10 pu?
its on the passanger side fender
Where is the fuel pump relay on a 1988 Chevy s10 2.8 v6 pick up truck?
It should be found under the hood, on top of the drivers side inner fender.
Do 1991 chevy s10 have ac relay and where is it?
It depends which engine you have but for the most part you should find the AC compressor clutch relay under the hood, on the drivers side firewall close to the brake master cylinder or under the hood, on top of the drivers side inner fender.
Where is the fuel pump relay on 1989 chevy s10?
If it has the 4.3 L engine, the fuel pmp relay would be under the hood, on the firewall, drivers side. If it has the 2.5 L or the 2.8 L engine it would be found under the hood on top of the drivers side inner fender.
