I just did it....There is a panel that covers from the top pf the stereo to below the cup holder...there are 2 screws at the bottom of this panel...and two more screws going up under the top lip of the panel (philips)....Pull off the panel after you remove the screws....then there one screw under the stereo itself holding it back ( philips)....The just detach the wire harness and you're all set
To remove the factory-fitted stereo from a Daewoo Cielo, start by prying off the trim panel surrounding the stereo using a flat tool or a trim removal tool to avoid damaging the dashboard. Once the trim is removed, unscrew the mounting screws securing the stereo in place. Gently pull the stereo out of the dash, disconnect the wiring harness and antenna cable from the back of the unit. Finally, make sure to keep all screws and connectors safe for reinstallation or replacement.
Remove the decorative stereo cover. Remove the stereo retaining screws. Pull the stereo out. Remove the wiring harness and the antenna cable.
Remove the retaining cover from your stereo. Remove the stereo retaining bolts. Slide the stereo out and remove the wiring harness. Reverse the process to install your new stereo.
Remove the decorative stereo cover. Remove the stereo retaining screws. Pull the stereo out and remove the wiring harness and the antenna cable.
Remove the decorative cover from your 2006 Chevy Express stereo. Remove the stereo retaining screws. The stereo will slide out. Remove the wiring harness and the antenna cable from the back of the stereo.
Remove the decorative stereo retaining cover. Remove the stereo retaining screws. Slide the stereo out and remove the wiring harness and the antenna cable.
Remove the cover from your 2001 Chevy Silverado stereo. Remove the stereo retaining bolts. Remove the wiring harness and the antenna cable from the back of the stereo.
It would depend on what system is fitted
Remove the decorative cover to your 2001 Chevy Lumina stereo. Remove the stereo retaining screws. Slide the stereo out and remove the wiring harness. Remove the antenna cable.
remove the plastic panel around the stereo by using a flat screwdriver to pop it out in all corners then remove screws then remove stereo remove the plastic panel around the stereo by using a flat screwdriver to pop it out in all corners then remove screws then remove stereo
Remove the 2002 Dodge Durango factory stereo decorative cover. Remove the factory stereo retaining screws. Pull the factory stereo out. Remove the wiring harness and the antenna cable from the back of the stereo.
Remove the retaining cover from your factory stereo. Remove the factory stereo retaining bolts. Slide the factory stereo out. Remove the wiring harness and the antenna cable from the back of the factory stereo.