You have to unbolt the entire soft bumper and remove. The dealer did this on my car to replace the headlight assembly.
it is behind the passenger side headlight assembly. you will have to remove the headlight assembly to replace it.
You need to remove the bumper assy in order to access the Head lamp, also be sure to by all fender covers clips before you do that.
Under the passenger side headlight assembly, you have to remove the entire assembly to get to it.
To replace each headlight assembly on a 2009 Dodge Charger is $100.73. So it will be more than $200.00 to replace both headlights.
To remove the headlight assembly on a 2007 Dodge Caliber, first, open the hood and locate the headlight assembly. Remove the screws or bolts securing the assembly, typically found on the top and side. Disconnect the wiring harness by pressing the release tab and gently pulling it out. Finally, carefully pull the headlight assembly out of its housing, taking care not to damage any clips or surrounding components.
To remove the headlight assembly on a 2000 Dodge Caravan, first, open the hood and locate the retaining screws or bolts securing the headlight assembly. Typically, you will need to remove a few screws from the top and possibly a clip from the side. Once the screws are removed, gently pull the headlight assembly forward to disconnect it from the car, and carefully unplug the electrical connector. After that, you can replace or service the assembly as needed.
To remove the headlight in a Dodge Magnum, start by opening the hood and locating the headlight assembly. Remove the screws or bolts securing the assembly, which are typically located at the top and side of the housing. Carefully pull the headlight assembly out from the front, disconnect the electrical connector, and then replace or service as needed. Reinstall by reversing the process, ensuring everything is securely fastened.
The Dodge Charger is a car made by Chrysler, since 1964. To change the headlights on it first remove the bumper, headlight bracket and replace the bulb, then re-install the bracket and bumper.
you have to remove the headlight assembly 3little bolts
Open the hood of the engine compartment. Remove the wiring harness from the headlight. Remove the retaining bolts from the headlight assembly. The headlight unit will come out. Reverse the process to install the new headlight.
You can restore headlights on a dodge charger using the Meguiar's Headlight Restoration Kit.
To replace the headlight assembly on a 1995 Dodge Dakota, first, open the hood and locate the headlight assembly. Remove the screws or bolts securing the assembly, then disconnect the wiring harness. Carefully pull the old assembly out and replace it with the new one, reconnecting the wiring harness and securing it with screws or bolts. Finally, test the new headlight to ensure it functions properly before closing the hood.