most times you dont have to.. try to access it from the engine side of the light
All you will need to change the bulb is a screwdriver and a new bulb. Remove the headlight cover using the screwdriver and remove the burnt out bulb. Once out, you can insert a new bulb into the slot and replace the headlight cover.
Open Hood. Remove the cover from the headlight by prying up the keeper. Remove the metric 13 nuts holding the headlight in. Take out headlight and replace the bulb. Reinstall the headlight and reinstall headlight and cover.
Changing a headlight bulb in a 2007 Buick Lacrosse can be done easily. Just remove the cover piece and change the bulb.
To change the headlight bulb on a Honda Ridgeline, first, open the hood and locate the headlight assembly. Remove the cover or dust cap from the back of the headlight housing, then disconnect the electrical connector from the bulb. Twist the old bulb counterclockwise to remove it, and insert the new bulb by twisting it clockwise into the socket. Finally, reconnect the electrical connector and replace the cover to complete the installation.
To change the headlight bulb on a Pontiac Wave it is good to remember to not touch the new bulb with the fingers. Gently remove the headlight lamp cover (it should pop off after a gentle pull). Turn the old bulb and pull to remove it. Then, using the small plastic gripper (sold where headlights are sold) insert the new bulb and turn 1/4 turn. Replace the headlight lamp cover.
To change the headlight bulb on a BMW 740i, first, turn off the ignition and open the hood. Locate the headlight assembly and remove the cover by twisting it counterclockwise. Carefully disconnect the wiring harness from the old bulb, then remove the bulb by twisting it out. Insert the new bulb, reconnect the wiring, and replace the cover, ensuring it's securely fastened before closing the hood.
To change the headlight on a 1994 Polaris Super Sport, first, remove the headlight cover by unscrewing the screws or releasing the clips holding it in place. Disconnect the wiring harness from the back of the headlight bulb, then remove the old bulb by turning it counterclockwise. Insert the new bulb, ensuring it is properly seated, reconnect the wiring harness, and reattach the headlight cover. Finally, test the new headlight to ensure it is functioning properly.
Just open the engine hood, and look behind either headlight that is out, and remove the cover behind the headlight, should probably be a turning cover, turn cover counter clockwise to remove, then un-plug connection for bulb, and remove light bulb. Light bulb will probably be held in by 2 metal spring clips, that are hooked in, just un-hook springs to remove bulb.
You probably don't remove the cover. The bulb is more than likely accessed from the back side. Read you owner's manual.
To change a light bulb in a 2006 VW Touareg, start by opening the hood and locating the headlight assembly. Remove the cover or cap from the back of the headlight housing. Carefully disconnect the electrical connector from the bulb, then twist and remove the old bulb. Insert the new bulb without touching the glass, reconnect the electrical connector, and replace the cover.
you need to remove the front fascia to remove the headlamp to change the bulb
To change the low beam headlight bulb on a 2002 Mercedes G500, first, ensure the vehicle is turned off and the keys are removed. Open the hood and locate the headlight assembly; you may need to remove the protective cover by unscrewing it. Disconnect the electrical connector from the back of the bulb, then twist and remove the old bulb. Insert the new bulb without touching the glass, reconnect the electrical connector, and replace the cover before testing the new headlight.