fold down rear seat,pull both upper and lower quarter panel interior trim panels and then the package tray slides right out. speakers are screwed into a plastic tray which comes out by pushing on on the most fwd tab then comes out as an assy. unscrew 4 screws and replace speakers but you must reuse the tray . . my 02 cav. has 4 wires going to each oem speaker. I'm stumped on how to wire in the new speakers. sound weak no matter which wire i tap into. even tried combining 2 and 3 wires onto the positive lead to no avail.
Remove the rear speaker covers in your 1994 Chevy Cavalier. Remove the rear speaker retaining screws. Remove the wiring harness from the back of the rear speakers.
Remove rear seat, them remove rear deck to get to the speakers.
Remove the covers to your 2000 Chevy Malibu rear speakers. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers. Reverse the process to install your new rear speakers.
Reverse the process to install the newYou will need to remove the covers from your 2003 Chevy Cavalier rear speakers. The covers are held in place with two retaining screws. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers.
Begin by removing the cover from your rear speakers. Remove the rear speaker retaining screws. Remove the wiring harness from the back of the speaker. The rear speakers will come out.
I am needing to remove the rear window from a 2000 Chevy Cavalier coupe body style
To remove the rear speakers from a 1988 Chevy Cavalier Z24 convertible, first, ensure the car is turned off and disconnect the negative battery terminal for safety. Remove the rear speaker grilles by gently prying them off with a flat tool. Next, unscrew the speakers from their mounts and carefully disconnect the wiring harness. After that, you can lift the speakers out of their locations.
6x9 don't fit I'm stuck 2
Remove the rear door panel.
Impala HQ .com
Remove the rear speaker covers from your 2000 Buick Park Ave. Remove the rear speaker retaining screws. Remove the wiring harness. Reverse the process to install the new rear speakers.
You need to remove the rear seat to access the speakers and remove the covers.