To remove the seat on a 1993 Skidoo Formula MXZ, first locate the seat mounting bolts, typically found at the rear of the seat. Use a socket wrench to unscrew these bolts. Once they are removed, gently lift the rear of the seat and slide it forward to disengage it from the mounting brackets at the front. Be cautious not to force it, as this could damage the seat or the brackets.
The rear seat is not designed to be removed. You can remove the center seat and slide the rear seat forward.
To remove the back seat from a 1997 Honda Odyssey the seat locks need to be opened. When the clips are unlocked the seat will be able to be lifted up and removed from the vehicle.
Should be a bolt at each corner of the seat
The rear seat isn't designed to be removed. If you have a center bench seat you can remove that by unclipping it, then slide the rear seat forward.
The rear seat is not intended to be removed. You can remove the center seat and slide the rear on forward into it's place.
very easy to remove seat. Turn the upper section of the seat down, then release the seat by pulling what comes from under seat, then it rises up, and you can remove the seat. Theres very clear pictures in the seats.
remove the bolts buddy.... lol
To remove the rear seat in a 1997 Cadillac STS, start by locating the mounting bolts at the front of the seat bottom, typically found under the seat cushion. Use a socket wrench to remove these bolts. Next, pull up the seat bottom to detach it from the rear clips, then remove it from the vehicle. For the rear seatback, locate and remove any bolts or fasteners securing it, then lift it upwards to release it from the vehicle.
You need to remove the rear seat, then remove the package tray.
To remove the rear seat in a 1997 Jeep Wrangler, start by folding the seat forward. Locate the two bolts at the base of the seat; these are typically 3/8-inch or 10mm. Use a socket wrench to remove the bolts, then lift the seat out of its brackets. Finally, ensure you check for any additional clips or hardware that may need to be released before completely removing the seat.
the battery is located underneath the rear seat ,remove rear seat by pulling upward on front of rear seat remove from car.next remove both + and- cables then completely remove bracket that holds battery.remove battery,andsame directions in reverse order