0
Jack up the front wheel you intend to work on, and remove the tire. There are two bolts that hold the brake caliper on, (located on the back side.) Remove these and the caliper will pull of the disc. Use a C-clamp to comperss the slave cylinder (push on the inside brake pad) This will make it so you can put the new pads in and still get it back on the disc. Pop ou tht eold pads, put the new ones in, and start bolting things back together. Not much to it.
unless you need to replace the rotors then when you retighten the spindle nut it is 75 foot lbs..back off 1/2 turn then tighten 25 inch pounds
What else can I help you with?
How do you repair front brake pads?
You do not repair them you replace them.
How do you repair brakes on a 1998 Mercedes e320?
How do you replace front Brake Pads on E300TD
How thick are new front brake rotors on a 2010 Ford Ranger?
What should the thickness be on the front brake lining for ford ranger 2010
How do you repair the front differential on a 2001 Ford Ranger edge?
repair manual fora front differential on a 2001 ford ranger edge
How do you replace the front brakes on a 1995 ford ranger?
What are the brake rotors minimum thickness on a 1997 Buick Century? Thanking you in advance.
How do you repair or replace front brake pads on a 1991 Ford Ranger?
Knock pins out holding the caliper in place. Pull caliper off of rotor. Remove old pads from inside of caliper. Sometimes, the back pad will still be sitting against the back of the rotor. Replace front pad back in the same grooves on the caliper.
How do you replace front wheel bearings on a 2000 Ford Ranger?
how do i replace front wheel bearinbs on 2000 ford ranger 4wd
How to repLace front brake pads on Mercedes Benz S430?
How to replace front brake pads on Mercedes s430
Are 2wd and 4wd front brake rotors interchangeable on 1997 ranger 4L V6 XLT?
are 2wd and 4wd front brake rotors interchangeable on 1997 ranger 4L V6 XLT
Do you have to replace the brake pads when you replace the front rotors?
no but it is recomended.
How do you replace front brake pads on 2002 mustang?
To replace front brake pads on a 2002 Ford Mustang safely raise and stabilize the vehicle. Remove the wheels and caliper. Slide out the front brake pads and replace with new units.
How do you replace the front brakes on a 96 Ford ranger?
Brake jobs are not a job to be done without a Manual.Your life and the lives of others and the life of your Automobile depend on them. Please purchase a [http://www.themotorbookstore.com/index.html Paper Repair Manual] OR a [http://www.themotorbookstore.com/manuals-on-cd.html CD Repair Manual] and do the Job correctly. Hope This Helps.
