answersLogoWhite

0

Well this one is very easy, pop the hood & look on the fire wall. It should be direclty in front of the steering wheel. The motor looks like a round can with something on top, & its turned side ways. There should be 2 or 3 bolts holding it on to the fire wall, just take those out & then pull the motor out. All you need to do is gett another motor & then out it right back in there....after yu have unplugged the old one of course....but the gears should be well greased (not oiled ) before you stick it on there. Put those 2-3 bolts back on & your all set to go.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

Where is the windshield wiper motor located on a 1987 jeep wrangler?

Where is the wiper motor located on a 1989 jeep wrang ler


Step by step instruction removing a 1989 Toyota windshield wiper motor?

Remove wiper arm caps, nuts & arms. Remove cowl louver cover. Disconnect wiper motor electrical connector. Remove 6 bolts and remove wiper linkage assembly. Disconnect wiper link from wiper motor. Remove 4 screws and wiper motor from firewall.


How do you replace a windshield wiper motor in a 1989 Toyota Camry?

To replace the windshield wiper motor in a 1989 Toyota Camry, first, disconnect the battery to ensure safety. Remove the wiper arms by unscrewing the nuts at their bases, then take off the plastic cover to access the motor. Unplug the old motor's wiring harness and remove the mounting bolts, then install the new motor by reversing these steps. Finally, reattach the wiper arms, reconnect the battery, and test the new motor for proper operation.


What size windshield wipers on 1989 bronco?

The 1989 Ford Bronco wiper blade sizes are 18" wiper blades on both sides front. See sources and related links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.


Why doesn't your 1989 Corsica wiper switch shut-off?

Possibly bad wiper motor, bad park switch, or bad wiper switch. Electrical short also possible.


How do you replace the windshield wipermotor on a 1989 Toyota pickup?

To replace the windshield wiper motor on a 1989 Toyota pickup, first disconnect the battery to ensure safety. Remove the wiper arms by unscrewing the nuts at their bases and gently pulling them off. Then, remove the screws or bolts securing the wiper motor to the firewall, disconnect the electrical connector, and take out the old motor. Install the new motor by reversing these steps, ensuring all connections are secure before reassembling the wiper arms.


Is there a wiper motor pulse board on a 1989 Suburban?

There is a relay under the steering column inside the vehicle.


What if your wipers on your 1989 Chevy are not working?

Check your fuse block or circuit breaker first, then turn wiper switch on and check for power at wiper motor, if the fuse/breaker is ok and you have power to motor, motor may be seized. listen for humming from motor, if none of above follow tech manual for testing wiper switch,or short to ground


Where can you find wiper relay for an 89 Celebrity?

Looking in my 1989 Chevy Celebrity manual I find a park relay inside the wiper motor but no reference to an external wiper relay. There is a fuse on the fuse block.


How does one change the wiper motor on a 1989 Mitsubishi Galant?

Its the black.......round motor that is at the back wall of your engine bay, could be on the drivers side,


Diagram of a 1989 Bronco II Fuse Box?

list of fuses for 1989 bronco 2


Where is the windshield wiper governor on a 1989 Ford F-150?

Small black box mounted under dash by drivers left knee. Connected to wiper switch on one end and goes to wiper motor at the other.