go to your fuse box and take out the fuse if you dont have a tool it might give you hell but make sure you know what your doing do you dont mess it up the insert new fuse
There are a couple of phillips screws on either side of the 80 amp fuse leading to the engine fuse box. :)
it is the 4998 engine code of 240 amp of the engine code:fgh46357fjg so the kind of fuse of 80 amp fuse is, 160 amp fuse. So you can multiply that and, 480 amps. There you go.
No, this is not monitored.
The black fuse cover comes off but the fuse is one piece and pulls out. Its just tight.
The main fuse is in the engine bay fuse box located near the battery. It is the largest rated fuse, usually 60 amp or 80 amp.
The 80 amp fuse for a 2000 Toyota Solara is located in the engine compartment fuse box. This fuse box is situated near the battery, typically on the driver's side. You can find the specific fuse by referring to the fuse diagram on the cover of the fuse box for identification.
Turn off the ignition. Remove the small bolts at the terminals with a socket wrench to allow the fuse to be removed. Replace and put bolts back on.
If you do that the likelihood is that you will blow the 3A fuse quickly. There is a reason why the current fuse is what it is, because it is expecting currents around 80% of 13 A or around 10 A.
To remove an 80 amp fuse from a 2005 Kia Rio, first, ensure the vehicle is turned off and the keys are removed from the ignition. Locate the fuse box, typically found under the hood or in the cabin, and identify the specific fuse you need to remove. Use a fuse puller or a pair of pliers to grip the fuse and gently pull it straight out. Always check the fuse for damage and replace it with a new one of the same amperage if necessary.
80 amp
The underhood fuse box. its either an 80 amp or 100 amp fues
look in your fuse bos under the hood and you have to take the bos apart so you can get to the little bolts that hold the fuse in