To replace the cam belt on a 1300 Suzuki Carry van, begin by disconnecting the battery and removing any components obstructing access to the timing cover. Next, align the timing marks on the crankshaft and camshaft to ensure proper timing, then remove the old cam belt. Install the new cam belt, making sure it is properly tensioned, and reassemble the timing cover and any other components. Finally, reconnect the battery and start the engine to check for proper operation.
When do you replace the timing chain on a 2005 Suzuki Grand Vitara?
Pl go to the Automobile section
To replace the serpentine belt on a 1997 Suzuki Sport, first, locate the belt tensioner and use a wrench to relieve tension on the belt. Carefully remove the old belt by noting the routing path, then install the new belt following the same routing. Make sure the belt is seated correctly on all pulleys, and finally, release the tensioner to apply tension to the new belt. Double-check the alignment and ensure everything is secure before starting the engine.
To replace the idler pulley on a 2001 Suzuki Esteem 1.8, start by disconnecting the negative battery terminal. Then, remove the serpentine belt by loosening the tensioner pulley with a wrench. Once the belt is off, unbolt the old idler pulley from its mounting bracket and replace it with the new pulley. Reinstall the serpentine belt, ensuring it's properly aligned, and reconnect the battery terminal.
According to the book, Belt replacement is at 60,000 miles. My mechanic recommended to replace the water pump and frontseal at the same time.
To replace the serpentine belt on a 2005 Suzuki XL-7, first, ensure the engine is off and cool. Locate the belt routing diagram, usually found on a sticker under the hood, and use a wrench or ratchet to relieve tension on the serpentine belt tensioner. Remove the old belt and carefully route the new belt according to the diagram, ensuring it's seated properly on all pulleys. Finally, reapply tension to the tensioner and double-check the belt alignment before starting the engine.
To replace the air conditioning belt on a 2002 Suzuki XL-7, first, disconnect the negative battery terminal for safety. Next, locate the tensioner pulley and use a wrench to relieve tension on the belt. Remove the old belt from the pulleys and install the new belt, ensuring it follows the correct routing path. Finally, tighten the tensioner back to its original position, double-check the alignment, and reconnect the battery.
belt
How to install drive belt for a 2001 suzuki esteem gle 1.8
http://serpentinebeltdiagrams.com/2000-2006-suzuki-vitara-belt-diagram/
Remove the belt from your 2001 Suzuki alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
If it's anything like a 1996 esteem there is no fan belt. It has an electric fan. Check for a bad relay in the fuse box under the hood first ( they are cheap to replace, about 10 bucks). Then try the fan motor.