you have to remove door panel and there are three nuts you have to take off of the mirror.
Visit siennaclub.org for detailed information.
To replace the surround for the passenger side mirror on a 1998 Chevy Silverado, first, remove the door panel to access the mirror assembly. Disconnect the wiring harness if your mirror has power features. Then, unscrew the old mirror surround from the mirror housing, and carefully replace it with the new surround, securing it with screws. Finally, reattach the door panel and reconnect any wiring.
To replace the passenger side mirror on the 1998 Nissan Maxima SE, first remove the door panel inside the door by releasing the clips below the panel and by unscrewing the handle screws. Then, remove the trim panel that covers the mirror mount inside the vehicle. There should be at least 4 screws. Release the wires from the old mirror and take the part off of the car. Add the new mirror and connect the wires. Replace the screws and the door panel.
Use your hand
You can find a backing plate for your 1998 Honda Accord passenger side mirror at most auto-parts stores. You can also find the backing plate at your local Honda dealership.
insisde tuck three nuts and wiring harness.
To replace the driver's side mirror on a 1998 Subaru Legacy, start by removing the door panel. First, unscrew any visible screws and gently pry off clips to detach the panel. Once the panel is off, disconnect the wiring harness for the mirror. Remove the three bolts securing the mirror to the door, replace it with the new mirror, and reassemble the door panel by reversing the steps.
How do you replace passenger side fender on a 1998 pontiac bonneville se
Highly doubtful because the circuit has to be there to power up the heater in the mirror.
Remove the plastic cover on the inside behind the mirror and then remove the three nuts holding ther mirror on. When you pull out the mirror unclip the wiring harness.
Try a glass shop
Remove the front door sail panel. There you will see 3 bolts holding the side view mirror. Remove bolts, replace / or fix side view mirror. Installation is the reverse of removal.