0
What else can I help you with?
Infiniti i30 runs hot with ac on?
check radiator for leaks
Where do you add AC coolant to a 1998 Infiniti I30?
low pressure line
How do you replace the AC compressor clutch on 2006 Jeep Liberty?
how do you replace the AC compressor clutch on 2006 liberty
What kind of AC refrigerant is used in a 1996 infiniti i30?
The 1996 Infiniti I30 with the 3.0 liter SFI DOHC 6-cylinder engine uses R-134a refrigerant. The capacity for this make and model is 23 ounces.
Where do I add freon into a 1996 Infiniti i30?
Freon is added through the ac low pressure port. The port is located on the aluminum pipe on the ac line.
How do you replace ac clutch on 2002 trailblazer?
The ac clutch is held on with a single nut, and can be removed with a remover tool. It the tool will not fit in the space available, then the entire compressor will have to be removed to replace the clutch.
How many belts do a 1998 Infiniti i30 have?
2 belts one for the power steering and one serpentine belt for the ac, alternator and water pump
How do you replace the clutch and bearing on a ac compressor for a 2002 Chevrolet blazer?
This requires special tools to remove and install the ac clutch and bearing. The air gap on the ac clutch must be done during install.
How do you replace the AC clutch on a 2002 Honda Civic?
To replace the AC clutch discharge the freon, remove the clips, and remove the screws under the bumper. Remove the driver side headlight, and bolts.
How do you replace ac clutch on Ford F-350 diesel 2003?
trying to replace the ac clutch on my f350 6.0 and the bolt up front seems to be a special one any sugestions
How do you replace the AC Clutch on 1997 Mercury Mountaineer 5.0L?
Use a hammer
How do you replace the AC clutch on a 97 Thunderbird V 6?
To replace the AC clutch on a 1997 Thunderbird V6, first disconnect the battery and remove the serpentine belt. Next, use a socket to remove the retaining bolt from the AC clutch, then carefully pull the clutch off the compressor. Install the new clutch by aligning it properly, securing it with the bolt, and reattach the serpentine belt. Finally, reconnect the battery and check the AC system for proper operation.
