Disconnect the 1982 Regal alternator. Loosen the alternator bolts and slide to release belt tension. Put new belt on ( you may have to remove other belts to gain access) and pull the alternator sideways to put medium tension on the belt while tightening the bolts. Reconnect the battery.
It is built into the alternator
i own a 81 i have a sticker on my fan shroud
Simple, just replace your alternator..
Trash the car and get yourself a jeep :)
Yes but you will have to change the Trans and also add Chevy motort mount brackest to the cross member.
1982 Toyota pin-out connections to alternator?
To replace the alternator belt on a 1982 Toyota Celica GT, first, disconnect the negative battery terminal to ensure safety. Loosen the alternator mounting bolts and the tensioner bolt to relieve tension on the old belt. Remove the old belt and install the new one, ensuring it is properly seated on the pulleys. Finally, adjust the tension by repositioning the alternator, tighten the bolts, and reconnect the battery terminal.
they sell transmission flush kits(advance auto) drop pan,change filter,replace pan with new gasket from kit tighten bolts to 40 ft/lbs(not sure check)add 2 !/2 qts fluid check level and ride on
On a 1982 Nissan 280ZX, the voltage regulator is typically located on the alternator itself. It is often integrated within the alternator housing, making it less accessible than standalone regulators found in other vehicles. If you need to replace it, you may have to remove the alternator from the engine bay. Always consult the vehicle's service manual for detailed information and diagrams.
alternator wires
inside alternator
So, what's the answer to my question? How do I set the dashboard clock on my 1983 Buick Riviera?