0
You have to pull the instrument cluster out of the car. On the back of the cluster are numerous bulb sockets. Turn the sockets (sort of the same way you have to turn the sockets to remove say..taillight bulbs except the wiring to these bulbs goes through the same printed circuit that feeds the rest of the instrument cluster) The sockets and bulbs should come right out. Pull the bulbs out of the sockets and take them to an auto parts store. Get the auto parts store to verify which bulbs you need (don't want to go to all this trouble and fing out you put the wrong bulbs in). Reinstall the bulbs in the socket and reinstall the sockets on the back of the instrument cluster and then reinstall the cluster.
What else can I help you with?
How do you replace dashboard lights on a 2006 Mitsubishi lancer?
To replace the dashboard lights on a 2006 Mitsubishi Lancer, first, disconnect the negative battery terminal to ensure safety. Remove the dashboard panel by unscrewing the necessary screws and gently prying it off. Locate the burned-out bulbs in the instrument cluster, twist them counterclockwise to remove, and replace them with new bulbs. Finally, reassemble the dashboard, reconnect the battery, and test the lights to ensure they work properly.
What would cause some dashboard lights to work but not others?
Replace the light bulbs that are burned out, usually from the back side of the instrument cluster.
How do you repair dashboard lights on a 1990 Nissan 300ZX?
It depends what lights you are talking about, most dash lights are just bulbs. However in the cluster for digital lights and the fog light acessories they are done by LED lights in which you can replace if you know the right voltage. There are a lot of dash lights, so IRepairing Dashboard LightsTake apart the dash (or area where the lights are burned out) and replace the bad bulbs with good ones.
How do you change the dashboard lights in a 1996 Isuzu?
I own a 1997 Isuzu Rodeo and had the same problem. I went to a local Isuzu new-car dealer and was quoted a price in excess of $100 to replace the burned-out dashboard lights. I was told that the cost is high because the top of the dashboard has to be removed in order to obtain access to the lights. I did not have the lights replaced. carlpers
How do you replace the dashboard lights on a 1999 Mazda Millenia?
Your dashboard lights suddenly not working is almost always your indication that your taillights are out. If the fuse for your taillights is blown and you replace it, your dash lights should be fine.
How do you replace the dashboard lights for the ventilation controls on a 2005 vw passat?
To replace the dashboard lights for the ventilation controls on a 2005 vw passat you need its user manual.
How do you replace dash board lights in a 2005 pontiac sunfire?
To replace the dashboard lights in a 2005 Pontiac Sunfire, first, disconnect the negative battery cable for safety. Remove the dashboard trim panel by unscrewing any screws and gently prying it off. Then, locate the bulb sockets on the back of the gauge cluster, twist them counterclockwise to remove, and replace the burned-out bulbs with new ones. Finally, reassemble the dashboard and reconnect the battery.
How do you replace dash lights on a vectra?
remove the dashboard, and u will see the lights behind it
Dashboard lights for Mercedes 300ce not working?
Your brake lights are out too! Replace the fuse.
Ford galaxy dashboard lights don't work?
If the Ford Galaxy dashboard lights don't work, there could be a problem with the fuses. There is also a possibility that a bulb is burned out or there is a short in the wiring.
How do you change the dashboard lights on 2005 crown vic?
you have to remove the cover of the dashboard to replace the light bulbs
How do you replace dashboard lights on 2004 avalanche?
To replace the dashboard lights in a 2004 Chevrolet Avalanche, first, disconnect the negative battery cable for safety. Next, remove the dashboard trim and unscrew the instrument cluster to access the bulbs. Carefully twist out the burnt-out bulbs and replace them with new ones, ensuring they are the correct type. Finally, reassemble the dashboard and reconnect the battery to test the new lights.
