Remove ALL dashboard screwscarefuly remove the dashboard,andyou will see were the bulbs are located,replace any/and/or/allthe bulbs needed,and reverse theprocedure to reinstall ! That's it !
you have to remove the cover of the dashboard to replace the light bulbs
Remove the instrument cluster then replace the bulbs. = =
remove dashboard and replace 2 bulbs behind it
Bad light bulbs.... Replace them...
It's a real pain to replace! The bulbs can be purchased at just about any auto parts store, but you have to completely remove the dash in order to access and replace the bulbs. It's a common problem (and a terrible design...)
Bulbs onastra mk4dashboard50 mins drop wheel 6 screws pull dashboard out
with the new one ! THE i said THE NEW ONE not A NEW ONE , THE .
They don't. You should should check and probably replace the bulbs. Refer to your owner's manual
Replace the light bulbs that are burned out, usually from the back side of the instrument cluster.
To replace the dashboard lights on a 2002 Infiniti G20, start by removing the dashboard cover using a flathead screwdriver or a trim removal tool to avoid damaging the plastic clips. Once the cover is off, locate the bulb sockets behind the instrument cluster, twist them counterclockwise to remove, then replace the old bulbs with new ones. After replacing the bulbs, reassemble the dashboard by reversing the removal process and ensuring everything snaps back into place securely. Finally, test the lights to confirm they are functioning properly.
Remove the cover around the controls and you will see the bulbs inside the climate control unit. It just pulls off.