answersLogoWhite

0

05+ Honda Odyssey license plate lights. Pop out the license plate lights in the rear. There are two of them. Use a very thin flathead screw driver and pop out the sides of the inner clear light assembly. They are on the sides. Once that is done, remove the light bulb and replace with a new bulb. Pop in the clear light assembly cover. Turn on lights to see if the bulb is working and it is is then you're done. Approximately 10-15 minutes total.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What size of light do you need to replace a parking brake light on a 2000 Honda Odyssey?

Original equipment part for brake light replacement on 2000 Honda Odyssey EX is: 7443 W21/5W STANLEY 12V 03U E4 2DW


Honda Odyssey abs light on?

Honda odessy abs light on when driving


How do you replace the clock light in 2001 Honda Odyssey?

http://www.odyclub.com/forums/showthread.php?s=f68dff7d552bbb0bd59c66d0d8be4b5b&threadid=23429


What would cause the drive light to blink on a 2003 Honda Odyssey?

It indicates transmissions problems. Had this happen at 103,000 km on our 2002 Honday Odyssey and had to replace the entire transmission.


How to replace dash light in Honda Odyssey?

This site gives step by step instructions here - http://www.marcelk.org/archives/71


How do you replace license plate light bulb on 2006 Honda Pilot?

To replace the license plate light bulb on a 2006 Honda Pilot, first, locate the light assembly above the license plate. Use a flathead screwdriver or a similar tool to gently pry open the light cover. Once the cover is removed, twist the old bulb counterclockwise to remove it and replace it with a new bulb, ensuring it is securely in place. Finally, reattach the light cover and check that the light is functioning properly.


How do you replace inner tail light assembly of Honda odyssey 2004?

To replace the inner tail light assembly of a 2004 Honda Odyssey, first, open the rear hatch and locate the access panel on the side of the tail light. Remove the screws or clips holding the panel in place, then disconnect the electrical connector from the tail light assembly. Next, unscrew the tail light assembly from the vehicle and carefully pull it out. Finally, insert the new assembly, reconnect the electrical connector, secure it with screws, and replace the access panel.


How do you replace license plate light assembly Honda Civic 2009?

To replace the license plate light assembly on a 2009 Honda Civic, first, open the trunk and locate the license plate light assembly. Use a flathead screwdriver to gently pry off the cover or lens. Remove the old bulb by twisting it counterclockwise, then insert the new bulb and reassemble the cover. Finally, test the new light to ensure it works properly.


How do you replaced tail light bulb on a 2005 Honda odessy?

How do i remove the tail light on a 2005 Honda odyssey to rpleced the light bulb.


What bulb does Honda Odyssey 2003 use?

See sources and related links below for 2003 Honda Odyssey light bulb lamp list.


Why do D4 light flashes in Honda Odyssey?

There is a problem with the transmission and you need to get it to either honda or a mechanic.


1998 Honda Odyssey abs light is on how do you reset it?

get your brakes fixed....