1) Remove side panels
2) Remove grill ( 4 phillips screws from back side)
3) Remove muffler bolts (4 5/16 self tapping bolts 2 to a side)
4) Remove muffler support/hood assembly (4 5/16 self tapping bolts 2 to a side)
5) Remove muffler (tap with a plastic hammer to slide off manifold)
6) Remove belt guide ( two "ears" that hold belt on engine pulley)
7) Remove tensioner spring
8) Roll engine over with 5/8" wrench while working belt out of groove
9) Replace belts as a set - use 5/8 wrench to roll engine over and guide belt back on
10) Re assemble in reverse order
how do you change drive belt on a ltx 1040 cub cadet
To replace a deck lift cable on a cub cadet lawn mower you can easily remove the two bolts underneath the deck that hold the lift cable in place and then replace the cable.
The 3000 Series Cub Cadet supposedly have no belts, not transmission belt nor deck belts.
You can replace the transmission belt, on a Cub Cadet 1042, by loosening the tensioner pulley. Once the tensioner pulley is loose the belt will easily come off.
Dont know either
You can replace the drive belt on cub cadet RZT 50 by first making sure that the engine of the vehicle is turned off. Then you can pop open the hood and remove the belt.
pto switch energizes a vacuum solenoid which puts pressure on the pto belts
The Cub Cadet LTX 1040 typically has two belts: the drive belt and the mower deck belt. The drive belt connects the engine to the transaxle, while the mower deck belt drives the blades. Always consult the owner's manual for specific details and maintenance guidelines.
MTD makes all of cub cadet
Cub cadet makes a great line of tractors. You can find your cadet at www.tractorhouse.com
There is a comparison, pros and cons, about cub cadet tractors at www.consumersearch.com. Enter cub cadet tractor into the search box.
Cub cadet is a division of international harvester.