Just click this link and print the diagram out and put it on that way. When you loosen the tensioner pull the ratchet away from the vehicle and you will need a 19mm socket. Good luck. http://www.search-autoparts.com/searchautoparts/data/articlestandard//motorage/162005/155700/article.pdf
To replace the belt tensioner on a 2001 Toyota RAV4, first, ensure the engine is off and cool. Remove the serpentine belt by using a wrench to relieve tension on the tensioner pulley, then slide the belt off. Disconnect the tensioner by removing the bolts that secure it to the engine, then install the new tensioner and tighten the bolts. Finally, reattach the serpentine belt, ensuring it's correctly aligned on all pulleys, and check the tension.
I need daigram of 2001 ford focus se serpentine belt
The serpentine belt on a 2003 Toyota Rav4 can be loosened by turning the retaining bolt on the idler pulley. The belt can then be shifted inward to loosen.
When you look at the grooved side of the belt and you see a lot of cracks or chunks missing going across the face of the belt.
About 150
Loosen the tensioner pulley on your 2001 Chevy Impala. The serpentine belt will become loose. Take the old belt off and put the new belt on. Tighten the new serpentine belt with the tensioner pulley.
Remove serpentine belt. Unbolt old pulley. Install new one & serpentine belt.
what are the correct steps to remove the serpentine belt that runs to the alternator on a 2001 Toyota AvalonWas that an ANSWER!? I assume the question is, "How do I remove and replace the serpentine belt on a 2001 Toyota Avalon". (You can remove it with a good sharp knife!)
Need a serpentine belt routing diagram for a 2002 Toyota rav4.
Replace serpentine belt on Chevy avalanche?HOW
How do you replace the serpentine belt in 1997 sunfire
To replace the serpentine belt on a 2008 RAV4, first, ensure the engine is off and cool. Locate the tensioner pulley and use a wrench to relieve tension on the belt, then slide the belt off the pulleys. Install the new belt by routing it according to the belt diagram typically found on a label under the hood, then release the tensioner to secure the belt in place. Finally, double-check the belt alignment and ensure it is seated properly on all pulleys before starting the engine.