If it's the same as my 1995 Ford Explorer XLT , open the liftgate and there are 2 screws at the top of the lense , remove the screws and carefully pull the lense straight back towards you ( besides the screws there are pins >>>>>>> that hold the lense in place )
To replace the brake light on a 2000 Ford Explorer, remove the screws holding the brake light in place. Gently, but firmly, pull the brake light out of the vehicle and replace with a new one.
I have the same problem - but my third brake light slightly flashes when the car is of (Explorer 1998). I have replaced the "stop light" switch with no improvement at all.
take the three or 4 Phillips screws out of the taillight, remove the light assembly and replace the bulb......all with the tailgate up of course.....
Check your brake fluid level in the brake master cylinder in your engine compartment when it is low your brake warning light will come on
Just unscrew the rear brake light, turn out the socket, and replace the bulb.
you have to replace the parking light bold because is the same as the brake light so just replace the light bold I think is the middle one between turning light and backing light. you have to replace the parking light bold because is the same as the brake light so just replace the light bold I think is the middle one between turning light and backing light.
Should be located at the upper end of brake pedal under dash area
The brake light in your dash will turn on if the brake fluid level is low in your brake master cylinder in your engine compartment
bulb # for brake light on your explorer is a 3157 backup light bulb # is 3156 hope this helps
How to replace a brake light on a nissan Tiida hatch back.
Something is wrong with the Anti-lock Brake System . It could be a fuse , a sensor , or some other problem . As long as the red " BRAKE " light is not on in your dash you still have " normal " brakes
No vehicle year was given so I have to keep it general... Ford Explorer Sport turn signal / brake light bulb lamp replacement: Purchase the correct replacement turn signal / brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement turn signal / brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for turn signal / brake light bulb lamp replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).