0
You have to remove the tail light first, and to do this you have to take the 3 screws on the tail light, open the trunk, remove the 3 screw and pull the light toward the outside (slide it to the side, if you are taking the left taillight out slide the tail light toward the left, if you are doing the right side slide it toward the right side).
Change the bulbs, and install on the reverse.
What else can I help you with?
How do you replace the light bulb of the headlight on a 1998 Chevy Prism?
the headlight assembly needs to come out in order to replace the bulb.
How do you change the bulb in the roof of a 1998 escort LX?
Remove the dome light lens, pull the old bulb out, and replace with new bulb; replace the lens.
How do you reset the light sensor on a 1998 Toyota Camry?
Replace the bulb that is burnt out.
How do I replace rear turn signal bulb on 1998 F-150?
unscrew the 2 screws holding the light in. pull the light out. replace the light.
How do you replace the front turn signal light bulb on a 1998 Nissan Sentra?
yes you do
How do you change the brake light bulb on a 1999 Kia Sephia?
Open the trunk and take out the two Phillips screws. The light assembly slides inward and will then come off. Pop the old light out and replace it.
How do you change the third brake light bulb in a 2001 kia sephia?
To change the third brake light bulb in a 2001 Kia Sephia, first, open the trunk and locate the plastic cover where the third brake light is situated. Remove the cover by unscrewing any screws or unclipping it. Once exposed, twist the bulb socket counterclockwise to release it, then pull out the old bulb and replace it with a new one. Reinsert the bulb socket, secure the cover back in place, and your third brake light should be functioning properly.
1998 dodge 3500 ram passenger blinker light will not flash and brake light will not work?
REPLACE THE BULB
How do you replace light bulb on high mount brake light on 1998 Mercury Villager GS?
Just unscrew it.
How do you replace the headlight bulb located on a 1998 Toyota Tacoma?
If you can't get to the back of the light assy you have to remove it from the vehicle and the bulb screws in.
How do you replace rear corner brake light bulb in 98 Acura CL?
To replace the rear corner lights on a 1998 Acura CL open the trunk. Find the brake light housing and disconnect the bulb. Install the new bulb.
How do you replace the brake light in a 1998 jaguar xj8?
Remove rear light unit cover in trunk. Turn bulb holder fastener 90 degrees counter clockwise and remove. Replace faulty bulb.
