0
# Notice which pulleys the alternator belt rides on. # Remove the alternator's adjustment bolt. # Remove the alternator's pivot bolt. # Remove the alternator. # Before you can put on the new belt, you probably will have to remove someother belts which means loosening other adjustment and pivot bolts. # Place the new alternator belt on the pulleys you took note of earlier. # Put the alternator back on. # Making sure to tighten all the bolts you loosened earlier. All belts should only deflect 1/4 to 1/2 inch. Longer belts deflect more than shorter belts.
What else can I help you with?
2002 Mazda protege 5 alternator belt removal?
how do u replace alternator belt on 2002 mazda protege 5 stationwagon
How do you replace the alternator belt on a 1999 Mazda Protege?
Remove the power steering belt first then the alternator belt will go on.
How do you replace the alternator belt on a Mazda Protege 1995?
you have to loosen the top alternator bolt alowing the alternator to swing forward loosening the belt
How do you change alternator belt on a 1988 Mazda 626?
To change the alternator belt on a 1988 Mazda 626, first, disconnect the negative battery cable for safety. Locate the alternator, then loosen the tensioner bolt and the mounting bolts on the alternator to relieve tension on the belt. Remove the old belt and install the new one, ensuring it sits properly on the pulleys. Finally, retighten the alternator bolts, adjust the tension as needed, and reconnect the battery cable.
How do you release tension on the power steering belt in order to change it on a 1994 Mazda Protege?
i need to change my alternator belt and don't know where the tension wheel is so i can take off the other belt to replace the alternator belt on my 94 Mazda protege 1.6l
How do you change the alternator belt on a Mazda 323?
To change the alternator belt on a Mazda 323, first remove the right hand air shield under the can. Then locate the pulley tensioner of the AC and loosen the bolts on the pulley. Finally, remove the alternator pivot bolt under the alternator to remove the old alternator belt and replace with a new one.
How do you replace the alternator on a 1995 Mazda Miata?
To replace the alternator on a 1995 Mazda Miata, first disconnect the negative battery cable to ensure safety. Remove the serpentine belt by loosening the tensioner, then unbolt the alternator from the engine. Disconnect the electrical connections from the alternator, install the new alternator, reconnect the electrical connections, and reattach the serpentine belt. Finally, reconnect the battery cable and start the engine to test the new alternator.
How do you replace the alternator belt on a 1995 Mazda protege es?
you have to loosen the top alternator bolt alowing the alternator to swing forward loosening the beltThis answer was retreived from the previous page
How do you change alternator belt on a 1998 Mazda 626?
To change the alternator belt on a 1998 Mazda 626 you need to first loosen the bolt that is located in the center of the adjustment pulley. Next, turn the adjustment bolt to the left until the belt is loose and can be removed. Reverse the steps to replace with the new belt.
How do you replace the alternator belt in a 1997 Geo Metro?
how do you replace 1997 alternator belt
How difficult is it to replace an alternator belt in a 1988 Grand Am and what tools are needed?
What size motor? What accessories do you have? BClear.
How do you replace the alternator on a 2001 Mazda?
on my 1996 mazda, i had to jack up the car and remove the right front wheel to get to the bottom through-bolt holding the alternator. the 2 tension adjustment bolts are accessed from the top. I also removed the splash shield for access to the belt. Since the alternator belt is inboard of the power steering belt, you also have to loosen this belt. it's me ...reysher
