answersLogoWhite

0

Using a 1/2 inch breaker bar, rotate the tensioner clockwise to allow the beli to be romoved. Remove the belt from the auxiliary components and carefully release the tensioner. Disconnect the cable from the negative terminal of the battery. Disconnect the two electrical connectors from the alternator. Remove the support bracket. On 1991 models or earlier, remove the AIR pump-to-alternator bracket bolt from the alternator. Remove the front lower bolt. Remove the rear lower bolt. on 1991 and earlier models, loosen the AIR pump-to-alternatorbracket bolt on the AIR pump and swing the bracket up and out of the way. Remove the alternator.

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

Why is my 1984 Corvette alternator charging constant 16.3 volts?

The system shouldn't exceed 15 volts. If the battery tests out okay and you are mechanically inclined, you can replace just the voltage regulator inside the original 1984 alternator. A replacement regulator should cost aprox $30.


1984 corvette you need to replace the door lock switch how do you get to the switch?

== ==


How much labor to replace engine in a 1984 Chevy c60?

labor time to replace engine in a 1984 chevy c60


Where is the external voltage regulator on a 84 Chevy celebrity?

The voltage regulator is inside the alternator on a 1984 Chevy.


How do you replace the windshield washer pump on a 1984 Chevy Corvette?

YOU BUY THE RESEVOIR WITH THE PUMP ALREADY IN IT, AND STOP TRYING TO SAVE TEN BUCKS. YOU WILL END UP BREAKING THE RESEVOIR TRYING TO GET IT OUT.


Where is the alternator on a 1984 Chevy c-10 with a 250 motor?

On the 250 cid engine the alternator lives on the passenger side front of the engine.


Where is the voltage regulator on a 1984 Chevy c10 pick-up?

The voltage regulator is inside the alternator.


Why is my 1984 alternator charging constant 16.3 volts?

If the battery checks out okay, you can replace just the voltage regulator inside the alternator.


How do you replace the battery in a 1984 Corvette?

The fiberglass panel at the side of the battery has to be removed and the battery is removed sideways.


How do you change the thermostat on a 1984 Corvette?

Remove the water supply hose from the top of your 1984 Chevy Corvette thermostat housing. Remove the thermostat housing retaining bolts. The old thermostat will lift out. Put the new thermostat in and reverse the process.


What is the firing order of the distributor for a 1984 Chevy Corvette?

1 8 4 3 6 5 7 2 all Chevy motors have this firing order.


How do you replace the battery in a 1984 Corvette C4?

The fiberglass panel at the side of the battery has to be removed and the battery is removed sideways.