yes 15 min 2 bolts and a plug just be sure to leave the belt on the rest and just gently rest it down in place once it's off the alternator. yes 15 min 2 bolts and a plug just be sure to leave the belt on the rest and just gently rest it down in place once it's off the alternator.
Remove the belt from your 1993 Chevy G 20 alternator. Remove the alternator wiring harness. Remove the retaining bolts from the alternator. Reverse the process to install the new alternator.
where is the trunk release button for 1993 chevy corsica
the wire is bare how do you replace the wire with out removing the dashboard on a 1993 Chevrolet corsica?
ther is a tesionor pulley that releives pressure to the belt. it should take a 5/8 wrench
Ask the same question at batauto.com in the forum for transmissions. Koug
To replace the alternator on a 1993 Chevy Beretta, first disconnect the negative battery cable to ensure safety. Remove the serpentine belt by loosening the tensioner, then disconnect the wiring harness from the alternator. Unbolt the alternator from its mount and carefully take it out. Install the new alternator by reversing these steps, making sure to secure all connections and reattach the belt properly.
how to remove headrest of 95 chevy corsica without tabs
A 1993 Chevy Corsica can only reach 111 MPH before the factory governor will be applied....this is with the 2.2 Liter engine
in the trunk
where are the senders on a 1993 Chevy corica for the oil and temputer gages to reinstall
On a 1993 Chevy Corsica, the fuel pump is located inside the fuel tank. To access it, you typically need to remove the fuel tank from the vehicle, as it is not externally accessible. It's advisable to disconnect the battery and relieve the fuel system pressure before attempting to replace the pump.
It is as simple as removong 2 bolts and replacing the mount. Goodluck, JOe