I did change it my self. It is highly recommended that a serpentine belt tool is borrowed from the local auto parts store. First remove the negative cable from the battery. Next remove the nut holding the ground wire on the alternator itself. This will expose the plug underneath the alternator. Unplug it. Use a 13mm wrench head which should come with the serpentine belt tool and place it on the nut on the tension pulley. Make sure you look at the belt so that you will know how to reinstall. Release tension and remove the belt. The alternator is held in place by 3 15mm bolts. One requires a deep socket to remove and is the most obvious of the three. The second is just to it's right and requires a lenghty extension as it is bolted fairly low. The final bolt is underneath the alternator and must be located by feel. Once these are free, the alternator can be removed. The new alternator can be installed by reversing these directions.
the one closest to the alternator
where is the location of tensioner of 2002 3.1 L Chevy Malibu to adjust if replacing the alternator?
It should take less than an hour.
Remove the belt from your 1999 Chevy Malibu alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
To replace the alternator on a 2004 Chevy Malibu, first disconnect the negative battery cable to prevent electrical shock. Remove the serpentine belt by loosening the tensioner, then unbolt the alternator from its mounting bracket. Disconnect the electrical connectors and power wire from the alternator, and then install the new alternator by reversing the steps. Reattach the serpentine belt and reconnect the battery cable once everything is secured.
How do you replace vent windowin a 2005 chevy malibu?
Its in the alternator!
The water pump on a 97 Chevy Malibu 4 cylinder is replaced by removing the engine accessories, drive belt, and radiator hoses. The pump can then be unbolted, removed, and a new pump installed.
HOW TO REPLACE A STARTER ON A 1998 CHEVY MALIBU
How do you change the fuel pump on a 2003 Chevy Malibu?
The head gasket on a 1999 Chevy Malibu is replaced by removing the coolant, intake manifold, and retaining bolts. The cylinder head can then be removed, the gasket replaced, and everything reassembled.
Alternator is not charging. Have it tested and/or replaced.