Raise Vehicle, Remove Tire, take out the 2 Brake Caliper retaining bolts and remove caliper, take the old pads out and replace with the new ones... its as simple as that
There is no such thing on a spirit.
yes 1987-1994 will work
To replace the CV axle on a 1993 Dodge Spirit with a 2.5-liter engine, start by safely lifting the front of the vehicle and securing it with jack stands. Remove the wheel, then take off the brake caliper and rotor to access the axle nut. After removing the axle nut, use a pry bar to detach the CV axle from the hub, then pull the axle out of the transmission. Install the new axle by reversing the steps, ensuring everything is properly torqued and reassembled.
The brake lights and all of the rear lights can be access through the inside back molding in the rear. there are little knobs that you turn to access them.
how to change belts
Dodge does not use inertia/reset switches.
16 gallons
In tank, electric.
there is none
not really familiar with a dodge spirit,but a torque converter and a clutch are two completely different things
According to the Gates website , the 2.5 liter 4 cylinder engine in a 1993 Dodge Spirit is NOT an interference engine , so I would say NO
i have a 94 dodge spirit with a 2.5. and the spark plug gap is 0.35 I have a 92 Spirit with the 2.5, all of the 2.5L engines have the cap of 0.350