0
This also applies to the 2001 GMC Sonoma:
There should be 2 screws between the bed sides and the tailgate. With the tailgate open, remove the screws and tilt the light out. (In the 2001 Sonoma, you pull the fixture straight back toward you; it is held in place by 2 flimsy plastic pins at this point). Then you remove the bulb holder from the lens and replace the bulb.There are 3 bulbs, and they are connected on the same circuit like old-style Christmas lights. That means if one goes out, the other 2 will no longer function. Before you replace any bulbs, you need to pull all 3 and check them to see if the filaments are still good.
*(My brake light and turn signal light both stopped working because the tiny 3rd auxiliary light was burnt. I replaced the wrong bulb at first and had to drive all the way back to the store to get the other sized bulb, once I figured out which was actually bad...when I replaced the small bulb, the other 2 started working again with old and new bulbs.)
Don't touch any of them by hand. It is always best to use cloth (your shirt will do in a pinch) to handle the bulbs. Oil from your fingers (or grease/dirt) can shorten the life of a bulb drastically. A set of 2 turn signal bulbs was 4 bucks, and the amber pair was also 4 bucks. (I forgot how much the bad one was). You should replace all of them while you're doing this so they are all equally bright and good for several more years until you have to do this again.
What else can I help you with?
How do you replace a turn signal bulb on a 2004 Jeep Liberty there is no screws?
how do you replace a turn signal bulb on a 2004 jeep liberty. I can not find screws or a panel to go through
How do you replace front turn signal bulb 2004 range rover?
how do you take out the front signal lamp on a 2004 range rover
How do you replace the front turn signal bulb on a 2004 Infiniti FX35?
To replace the front turn signal bulb on a 2004 Infiniti FX35, first, open the hood and locate the headlight assembly. Remove the screws or clips securing the assembly and gently pull it out to access the bulb. Twist the turn signal bulb socket counterclockwise to remove it, then replace the old bulb with a new one, ensuring it is securely in place. Finally, reassemble the headlight assembly and test the turn signal to ensure it works.
How do you replace the front turn signal light bulb on a 2004 Pontiac Grand Prix?
pictures of how to change front signal bulbs on a 2004 grand prix pontiac
2002 Chevy cavalier turn signal bulb replace?
How do you replace a turn signal bulb in a 1998 cavalier
How do you replace the right turn signal bulb in the mirror on a 2004 vw beetle?
d,ont know help
How do you replace the front turn signal bulb?
trouble putting right front signal bulb in.
How do you fix turn signal on 2004 jeep wrangler?
If they come on and will not flash, replace the Flasher Relay. If they just don't come on replace the blown out bulb.
How do replace turn signal bulb on 2004 Chevy Express?
Slide under bumper, you'll see the wire harness, disconnect wire harness / bulb housing from the signal glass housing with a 1/4 counter clockwise turn, replace bulb ( 3157 i believe ) re-install
How do you replace front turn signal bulb on 2004 cadillac cts?
Get a creeper and go at it from the bottom, all of what you need is right there.
How do you replace a front turn signal bulb for a 2000 sts Cadillac?
How do you replace a front turn signal bulb for a 2000 sts cadillac?"
How do you Replace side mirror turn signal bulb on a 2008 Passat?
How do you replace the side mirror turn signal bulb on a 2008 Passat?
