Take out the battery tray and remove the starter. Unhook the clutch cable and remove the bracket. Take out the speed cable and unplug a couple wire harness's. I removed hood of vehicle so i had more room. Support motor with a jack. Unhook the stablelizer bar and gear shifter. Put a jack under trans and crossmember. Unbolt the transmission and crossmember and it's ready to drop. Time your looking at 4 hours
i learned by watching the video
how do you adjst clutch on 87ford f150
This is a big job. You have to take out the transmission. If it is 4 wheel drive it is an even bigger job. The clutch is between the engine and transmission.
Replacing a clutch in your 2000 Ford F1 50 pickup truck will cost approximately $550. The clutch will cost $125 and the labor will cost $425.
About 900
To replace the clutch slave cylinder on a 1997 Ford F150, first, safely lift the vehicle and remove the transmission's inspection cover. Disconnect the hydraulic line from the slave cylinder and remove the mounting bolts securing the cylinder. Install the new slave cylinder by bolting it in place and reconnecting the hydraulic line. Finally, bleed the clutch system to remove any air, and reassemble any removed components before testing the clutch operation.
Yes,
how do i find the neutral, or clutch switch on a 2003 ford F150?
How do I replace the block heater in my 1998 F150 4.6L?
Replace clutch cable on sportsbike
Clutch not fully releasing, low of fluid, or synchronizers bad. You may need to adjust the clutch pedal free play.
Im not sure, but why the hell would you want to do this?