it depends on the vehicle, on my motorcycle i have to remove the side and front plasics then remove the dash unit, then open the dash unit and replace the bulb, then put everything back.
remove the gage cluster the bulb is on the back of the cluster
pull the dash clusture and remove bulb locks behind it
ask a repairman
To replace fog light bulb of Monte Carlo you must remove the entire assembly. Replace the bulb that has been hindered and replace the assembly.
is this a bulb on the out siude on on the panel in side the car dash i should say ?
There is no bulb, the clock is actually an LCD. The clock will have to be replaced.
no
First, check the fuse box and replace the fuse for the indicator lights. If the lights still do not work then replace the dash bulb itself.
To replace the drive bulb on the dash of a 1994 Land Cruiser 80 Series, first, remove the dash panel by unscrewing the screws and gently prying it away. Locate the bulb holder behind the gauge cluster, twist it counterclockwise to remove it, and then pull out the old bulb. Insert the new bulb into the holder, reassemble by twisting it back into place, and finally, reattach the dash panel. Make sure to test the new bulb before securing everything back together.
There are several bulbs for dash illumination. They are attached to the backside of the dash cluster. The best way to access the bulbs would be to remove the dash cluster.
there is no light bulb for the odometer. its a digital display. you have to replace the dash. used usally a 100. or so. had it happen to me. 2000 buick regal gs