How do you replace the front turn signal bulb located on a 1991 Honda Accord?

Answer 1

Hey Melissa==You can remove the bulb fronm the rear of the light and replace it. GoodluckJoe

For Melissa and others:

I will describe this as a left side change. Reverse left/right directions for the other side.

Use a Philips head screw driver to remove the turn signal housing/lens assembly. The screw remains captive in the housing.

The screw is hard to see. Your screwdriver will fit in a hole in the bumper cover, just to the left of the orange signal lens, at an angle, pointing toward the left front wheel.

After a few turns, gently pry the lens from the left end outward toward the right. If it doesn't come nicely, turn the screw some more.

Once the housing is out, you can easily turn the bulb holder 1/4 turn to remove it and subsequently the bulb.

I'd add that the right side of the lens housing (for the left side change described above) is held in only by a tab--so sliding the lens from right to left as you pry on the left side should pop the whole housing out.