How do you replace the fuel pump on a 2000 Dodge Grand Caravan?

Answer 1

drop the tank out the bottom and use a very large set of channel locks
# Remove fuel filler cap and perform Fuel System Pressure Release procedure. # Disconnect negative cable from battery. # Insert fuel siphon hose into fuel filler neck and push it into the tank. # Drain fuel tank dry into holding tank or a properly labeled GASOLINE safety container. # Raise vehicle on hoist. # Use a transmission jack to support the fuel tank. Remove bolts from fuel tank straps. Lower tank slightly. # Clean area around fuel tank module and tank to keep dirt and foreign material out of tank. # Disconnect fuel lines from fuel pump module by depressing quick connect retainers with thumb and fore finger # Slide fuel pump module electrical connector lock to unlock. # Push down on connector retainer and pull connector off module. # remove plastic locknut counterclockwise to release pump module # Carefully remove pump module and O-ring from tank # Discard old O-ring. == # Wipe seal area of tank clean and place a new O-ring seal in position on pump. # Position fuel pump in tank with locknut. # Tighten locknut to 53 N·m (43 ft. lbs.) # Connect fuel lines. # Plug in electrical connector. Slide connector lock into position. # Raise fuel tank, install bolts into fuel tank straps and tighten. # Lower vehicle on hoist. # Connect negative cable from battery. # Fill fuel tank. Check for leaks. # Install fuel filler cap.