0
What else can I help you with?
How do you open the strimmer to replace line?
Take it to a shop
Why does your strimmer line keep breaking?
Could be a number of reasons. The line is old "if so it tends to break easily" or inexpensive strimmer line can be suseptable to snapping easily.
How do you rethread a double strimmer?
To rethread a double strimmer, first, ensure the strimmer is turned off and unplugged. Remove the spool from the trimmer head by pressing the release tabs and pulling it out. Cut a length of trimmer line, typically around 20-25 feet, and thread it through the spool's holes, winding it evenly in the designated direction. Finally, replace the spool back into the trimmer head, ensuring the line is properly fed through the exit holes, and you're ready to go.
How do you fill flymo strimmer spool?
To fill a Flymo strimmer spool, first, remove the spool from the strimmer by pressing the tabs or unscrewing it, depending on the model. Next, take the appropriate length of trimmer line (usually specified in the user manual) and insert one end into the spool's designated slot, then wind the line around the spool in the direction indicated by the arrows. Leave some line free at the end, then secure it by slotting it into the spool's holding notches. Finally, reattach the spool to the strimmer and ensure it is locked in place.
What is bump feed on grass strimmer?
Bump feed on a grass strimmer refers to a mechanism that allows the user to release more cutting line by tapping the strimmer head against the ground while operating it. This action causes a spool inside the head to advance the line, providing a fresh length for cutting without the need to stop and manually adjust the line. It enhances efficiency and convenience, making it easier to maintain a consistent cutting performance.
How do you extend cutting cord on ryobi strimmer?
To extend the cutting cord on a Ryobi strimmer, first ensure the strimmer is turned off and unplugged for safety. Locate the spool cover and remove it by pressing the tabs or unscrewing it, depending on the model. Then, pull out the existing cord, and if needed, feed new cutting line through the spool according to the manufacturer's specifications, winding it in the correct direction. Finally, reattach the spool cover and trim any excess line to the desired length.
How do you moe the lawn?
with a lawn moer or a strimmer
What cuts grass and starts with Str?
Strimmer.
What is oil petrol ration for Efco 220 Strimmer?
25-1
Can you fit a blade to your stihl petrol strimmer?
Yes, you can fit a blade to a Stihl petrol strimmer, but it depends on the specific model and the type of blade. Some models are designed to accommodate cutting blades, while others may only support line trimmers. Always check the manufacturer's guidelines for compatibility and ensure that you use the correct attachment to avoid damage or safety hazards.
What is the oil to petrol ratio for a 2 stroke Tondu garden Strimmer?
I have a Tondu S180 strimmer. The petrol to oil ratio is 25:1. This information is embossed on the fuel tank filler cap on my machine. Peter.
How do you replace the license tag light-bulb on a 2005 Colorado?
You have to replace it by crawling under the bumper. It may be handy to have a flashlight with you. Twist and/or pull the bulb out to replace.
