Luckily, all spark plugs are available without removing the intake manifold. Tools you will need are:
ratchet set6"-9" extention 3/8" drive (6" with an added 3" drive will work just as good)sparkplug socket
First start out by removing the black plastic cover over the front intake manifold, there are three cap screws that you must remove using your ratchet set. This will expose three of the six spark plugs and respective wires.
Next, follow the spark plug wires back to where they attach to the coilpack, note the other three spark plug locations just under and forward of this coilpack, there are your other three spark plugs.
It should be pretty much self explanitory from here on out, but just remember it is easiest to do one wire and plug at a time, so as to match up the wire with the correct size and avoid dealing with the possibility of matching up the coilpack with the wrong spark plug, then your car will definitely not want to run.
Hope this helps, let me know if you need more help.
Seneca Johns
Change air filter and clean or replace spark plugs
How to replace spark plugs on a 2010 ford fusion
On a 1995 Ford Contour : According to one of Ford's websites : The spark plugs on the 2.0 liter four cylinder are gapped at ( .050 inch ) For the 2.5 liter V6 ( .054 inch spark plug gap )
you don't, you buy a chevy.
You have bad spark plugs and or cap and rotor
thanks
If you gap all the new plugs first and then replace the plugs and wires one at a time you won't have to worry about messing up the firing order. (This will happen if you pull all the plug wires at once and don't replace them in the same locations.)
There are a couple of reasons why a 1999 Ford Contour may misfire. The spark plugs may need changed or the coil pack may be bad.
It unscrews just like a spark plug.
The spark plugs on a Ford Explorer are replaced by first disconnecting the battery. Remove the spark plug using a spark plug socket. Replace with the factory recommended spark plug.
Use a spark plug socket with extensions.
To replace spark plugs and the air filter in a 2003 Ford Fiesta, it is important to do the spark plugs one at a time. Replace the spark plug wire each time before loosening the next plug. The air filter is enclosed in a plastic case near the left front of the engine.