Hi Scenic owner,
To access to the location, you have to remove engine cover by lifting the front part, ie nearer to you, then pull the cover towards you. This will prevent damaging the cover.
Every spark plugs has its individual ignitor. It can be removed by unfastening bolt size 10mm socket.
Once the ignitor is removed, the spark plug which is inside the plug well can be removed by using the right size spark plug socket wrench.
Hope this help.
My Scenic is a 2001 model with a 1998cc motor. The engine type is F4R which has 4 spark plugs. The spark plugs use a 5/8" socket plug. You will need about a 15cm extension on the socket as the plugs are situated deep inside the engine.
How do you replace the spark plugs on a Peugeot 307?
0.9mm
How to replace spark plugs in a 1989 jeep cherokee?
The spark plug gap for a Renault Scenic 16v 1.6 2007 model is typically set to 0.9mm or 0.035 inches. It is important to ensure the correct gap is maintained to allow for proper ignition and combustion within the engine cylinders. Using a gapping tool, carefully adjust the electrode distance to the specified gap measurement before installing the spark plugs.
Take old spark plugs out put new spark plugs in
It is 0.9mm
how to replace spark plugs on 2006 camry LE
To replace the rear spark plugs of a 2007 Arcadia, you will need to lift the car and replace the spark plugs from the bottom. You will also need to lower the front cradle for proper installation. This will allow easy access to remove and replace the spark plugs.
It is important to replace old spark plugs to keep a car engine running well. To replace them disconnect the battery, remove the cables, remove the old spark plugs, replace with the new spark plugs, replace the cables in the correct order, and connect the battery.
You should replace the spark plugs when your car won't start first time but does eventually.
How to replace spark plugs on a 2010 ford fusion