Go to the in side of the bed and the are two screws and the it pop off
how can i replace a brakelight bulb on a 2002 nissan frontier?
Soak it in lube.
By asking acablest to do it.
I believe you have to unscrew a couple bolts on the inside of the truck bed to get the taillight assembly off the truck then you can unscrew the light sockets and replace the burnt out bulb
Take out the two screws and replace one or both of the lamps.
To change the fog light on a Nissan Frontier you will need to remove the screws which hold the light assembly in place. These screws may be located under the hood or off to the side of the light on the front of the vehicle. Unclip the plastic relay holding the light in place. Clip the plastic relay into the new fog light and reposition the light in place. Secure the light assembly in with the screws.
I just had this problem on my 98 Frontier because the brake lights were staying on. I had to replace the brake light switch and the brake light button for it to go out.
You have to unbolt the entire tail lamp assembly to change the bulbs. Unbolt the tail lamps from inside the corners of the bed, replace the light bulbs, bolt the tail lamps back in place.
how to change a rear break light on a 1998 nissan frontier four cylinder?
there are two screws or bolts that hold rear light assembly located on inside of bed (10mm wrench) remove these and the complete light assembly comes out. do not remember which light is taillight but which ever one isn't working is the one you replace. There are 3 bulb retainers in the rear light assembly. Turn whichever bulb retainer you need to replace counter clockwise and it will come out and bulb is then accessible. If you are having constant problems with this, you may have the same problem I had and there is a recall on taillight assembly and Nissan will replace it for free. just had mine done.
how to change the brake light in a Nissan frontier 1999
on a 2004 Nissan frontier changing the small marker light on the driverside (clear one)?