As i recall, the water pump is bolted to the front of the engine block. The cooling fan, is then bolted to a 2" dia. flange, with 4 machine theard (fine) bolts that have 7"/16
There is a plate between the pump and the timing cover, don't forget to reuse that plate. The new pump should come with 2 gaskets, one goes between the pump and plate, the other goes between the plate and timing cover.
how do I replace water pump 2000 Pontiac Grand AM SE1?
yes
To replace the water pump on a 1967 Pontiac GTO, first disconnect the battery and drain the coolant from the radiator. Remove the radiator hoses, fan shroud, and fan to access the water pump. Unbolt the old water pump from the engine block, clean the mating surfaces, and install the new pump with a new gasket, ensuring proper torque on the bolts. Finally, reassemble the components, refill the coolant, and reconnect the battery.
Pay a mechanic to replace it
LOOKING TO FIGURE OUT HOW TO CHANGE WATER PUMP 2001 PONTIAC GRAND AM 2.4 LITTER
its impossibe!
buy a chilton's book.
When I first realized I had to change the water pump in my Grand Am it looked pretty daunting and I wasn
V6 3.1 OR QUAD 4 2.3?
about 2 hours
www.autozone.com is a wealth of information with pictures, too.Click on the left side where it says Repair Info. Select 1993, Then Pontiac, Then Bonneville, then water pump. It helped us.
remove belt pump is accessable remove bolts make sure coolant is drained first replace