To replace the trunk lid springs on a 1984 Mercedes-Benz 280SL, first, ensure the trunk is supported to prevent it from closing suddenly. Remove the old springs by detaching them from their mounting points, which may require a screwdriver or wrench. Install the new springs by securing them in the same positions as the old ones, ensuring they are properly aligned and tensioned. Finally, test the trunk lid's operation to ensure the springs are functioning correctly.
There is no such thing as a 280SL R129 The R129 battery is in the trunk
How do you replace trunk lid springs on a 107 body 1983 mercedes 380sl?
To replace the trunk lid springs on a 1999 Mercedes, first, safely support the trunk in an open position using a prop or assistant. Remove the old springs by detaching them from their mounting points, typically using a flathead screwdriver to release the clips or hooks. Install the new springs by securing them to the same mounting points, ensuring they are properly seated. Finally, test the trunk operation to ensure the springs are functioning correctly.
how do i replace a trunk lock with another lock that has a key
You don't!
Sometimes parts on a car grow old and break. Replacement trunk lid springs can be bought at car part stores. The person may have to have them special ordered if they are an older part.
To replace the trunk lock on a 1996 Nissan Maxima, start by removing the trunk lining to access the lock mechanism. Disconnect the wiring harness and unscrew the lock assembly from the trunk lid. Replace it with the new lock, reattach the wiring harness, and secure it with screws. Finally, replace the trunk lining to complete the installation.
go into the trunk and disconnect the wires and then pull the speakers out from the trunk and replace.
you can turn the switch off (located on the right side of the trunk) or you can replace the air springs with regular spring. there is a special suspension kit
How do i get the trunk to close when it sometime works
It is not possible to replace the trunk lock on a 1993 Caprice Classic while the trunk is closed. A person will have to remove the back seat, crawl into the trunk and open the lock manually before it can be replaced.
Pull back trunk cover inside trunk. Remove the large thumb screws inside the trunk. There will be 6-10. Remove lens assembly from outside. Unplug all lights from lens. Install lights in new lens a replace in car. Reinstall thunb screws and tighten. Replace trunk cover