answersLogoWhite

0

Lift the truck in the air using a jack then secure the vehicle with jack stands then take the tires off with a socket and ratchet next take the cotter pin out of the castle nut on the bottom side of the ball joint after that is take the castle nut off remove the 3 bolts on top knock the old ball joint out and reverse process for instillation make sure you torque the wheels to the right specs

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How do you replace the upper ball joint on a 1994 Isuzu pickup?

To replace the upper ball joint on a 1994 Isuzu pickup, start by safely lifting the vehicle and removing the front wheel. Disconnect the brake line and remove any components obstructing access to the upper control arm, such as the shock absorber or sway bar link. Use a ball joint separator tool to detach the ball joint from the control arm, then remove the retaining bolts and replace the old ball joint with a new one. Reassemble the components in reverse order, ensuring everything is securely tightened.


How do you replace upper ball joint on 2002 sierra?

Part Of Upper Control Arm


Where is the fuel pressure regulator on a 1998 Chevy pickup 4.3L engine?

Under the upper intake assembly


How do you replace upper ball joint on a 98 ranger?

u can't just change the upper ball joint, u have to change the whole upper control arm. It is welded to the arm in one piece.


How do you replace a radiator in a 1992 Chevy S10 pickup 4-cylinder 5 speed no ac?

Remove fan shroud Drain radiator Remove upper and lower radiator hoses Remove upper mounting bolts Lift radiator out of lower support cradle


Where is the fuel pressure regulator on a 1998 Chevy pickup 4.3L Vortec engine?

Under the upper intake assembly


How do you replace driver side upper Ball joint in a 1995 Lincoln Mark VII?

You have to change the upper control arm.


How do you change a upper passanger side ball joint on a 1994 Chevy silvarado 4x4?

if it is original the upper ball joint is riveted in, it will need to be chisel out,there are four rivets and then the nut that holds it to the control arm.new ball joint will come with bolts and nuts


How do you replace the upper and lower ball joints on a 2002 Chevy S10 pickup truck?

If its 2 wheel drive, you will need a press. Those ball joints are pressed into the upper and lower control arms. If it is 4 Wheel drive you need to remove the rivets with either an air chisel or to drill them out.


Where is the thermostat on a 1999 Chevy C1500 5 L pickup?

Should be in a removable housing at the engine end of the upper radiator hose


How do you remove upper ball joint on 1996 Chevy blazer?

Just learned this the hard way today after trying to do it myself. The ball joint will not come out until you remove the brake caliper and rotor. Too time consuming for a do it yourselfer in my opinion...I had the shop down the street replace the ball joint for 1.1 hours labor (about $80).


How do you replace the upper ball joint on a 1992 Acura Vigor?

To replace the upper ball joint on a 1992 Acura Vigor, start by lifting the vehicle and removing the front wheel for access. Disconnect the upper control arm from the steering knuckle and any associated components, then remove the ball joint retaining nut. Use a ball joint separator or a suitable tool to detach the ball joint from the control arm, and replace it with a new one, ensuring proper alignment. Reassemble all components, torque the fasteners to the manufacturer's specifications, and reinstall the wheel.