To replace the upper control arm on a 2000 Kia Sportage, first, safely lift the vehicle and remove the wheel. Then, disconnect the ball joint at the upper control arm, followed by removing the bolts securing the control arm to the frame. Once the old control arm is removed, position the new control arm in place, secure it with bolts, and reconnect the ball joint. Finally, reattach the wheel and lower the vehicle.
already answered under 2000 kia sportage.
if you mean iac motor, it is located on the upper intake at the throttle body. if you mean iac motor, it is located on the upper intake at the throttle body.
I have 2000 expedition and thought i could change then. After taking my wheel off i notice they could not be change. You need to replace the upper control arm.
For safety, a machanic man will do that job for your Kia.
2 days.
Replace the leaking part
The CV joint in a 2000 Kia Sportage can be replace by roving the tires, axle nuts, and the knuckle bolts on the struts. Next, the CV joint can be removed by placing a screwdriver between the transmission and the CV joint will pop out.
Best to replace the tank with a new one if you live in the US check with your local dealer there was a recall to replace the tanks on the sportage at no cost to the owner
how do you chang the idel arm
With the proper tools, about 3 and a half hours.
Take out the old one...then put a new one in.
locate the fuse panel under the hood of your sportage. There is two bigger relays in that panel 1. the egi control relay. 2. the fuel pump relay.