To reprogram a 2005 Chrysler Pacifica key fob, first, insert the key into the ignition and turn it to the "On" position without starting the engine. Press and hold the "Unlock" button on the key fob while turning the ignition back to the "Off" position, then back to "On" again. Release the "Unlock" button and press the "Lock" button on the fob within 5 seconds. Repeat this process for any additional fobs you wish to program, as the system can program up to four fobs.
No
what answer!
nothing works and I replaced the battery. to the fob
You have a failure with the key or the computer that senses the chip in the key.
You normally do not have to reprogram the key when you replace the battery. If you do you will have to contact your VW dealer.
You'll probably need to have this done at a dealership.
2006 jetta tdi both key remote not working
the bastards at the dealership have to do it...had it done, not cheap.
Take it to your dealership they would be the one to help you with that.
your key fob can only be programed by the local gm dealer.
To reprogram a Lexus RX300 key fob, first, sit in the vehicle and close all doors. Insert the key into the ignition and turn it to the "ON" position without starting the engine, then turn it back to "OFF." Repeat this process twice, then turn the ignition back to "ON" a final time. Press and hold the "lock" button on the key fob for a few seconds, and this should reprogram the fob. If this doesn't work, consult the owner's manual or a professional locksmith for assistance.